CWNP CWAP-404 Exam Topics:
| Section | Objectives |
|---|---|
Protocol Analysis - 15% | |
| Capture 802.11 frames using the appropriate methods | - Select capture devices
- Install monitor mode drivers |
| Understand and apply the common capture configuration parameters available in protocol analysis tools | - Save to disk - Packet slicing - Event triggers - Buffer options - Channels and channel widths - Capture filters - Channel scanning and dwell time |
| Analyze 802.11 frame captures to discover problems and find solutions | - Use appropriate display filters to view relevant frames and packets - Use colorization to highlight important frames and packets - Configure and display columns for analysis purposes - View frame and packet decodes while understanding the information shown and applying it to the analysis process - Use multiple adapters and channel aggregation to view captures from multiple channels - Implement protocol analyzer decryption procedures - View and use a capture’s statistical information for analysis - Use expert mode for analysis - View and understand peer maps as they relate to communications analysis |
| Utilize additional tools that capture 802.11 frames for analysis and troubleshooting | - WLAN scanners and discovery tools - Protocol capture visualization and analysis tools - Centralized monitoring, alerting, and forensic tools |
| Ensure appropriate troubleshooting methods are used with all analysis types | - Define the problem - Determine the scale of the problem - Identify probable causes - Capture and analyze the data - Observe the problem - Choose appropriate remediation steps - Document the problem and resolution |
Spectrum Analysis - 10% | |
| Capture RF spectrum data and understand the common views available in spectrum analyzers | - Install, configure, and use spectrum analysis software and hardware - Capture RF spectrum data using handheld, laptop-based, and infrastructure spectrum capture solutions - Understand and use spectrum analyzer views
|
| Analyze spectrum captures to identify relevant RF information and issues | - RF noise floor in an environment - Signal-to-Noise Ratio (SNR) for a given signal - Sources of RF interference and their locations - RF channel utilization - Non-Wi-Fi transmitters and their impact on WLAN communications - Overlapping and non-overlapping adjacent channel interference - Poor performing or faulty radios |
| Analyze spectrum captures to identify various device signatures | - Identify various 802.11 PHYs
- Identify non-802.11 devices based on RF behaviors and signatures
|
| Use centralized spectrum analysis solutions | - AP-based spectrum analysis - Sensor-based spectrum analysis |
PHY Layers and Technologies - 10% | |
| Understand and describe the functions of the PHY layer and the PHY protocol data units (PPDUs) | - DSSS (Direct Sequence Spread Spectrum) - HR/DSSS (High Rate/Direct Sequence Spread Spectrum) - OFDM (Orthogonal Frequency Division Multiplexing) - ERP (Extended Rate PHY) - HT (High Throughput) - VHT (Very High Throughput) - HE (High Efficiency)
|
| Apply the understanding of PHY technologies, including PHY headers, preambles, training fields, frame aggregation, and data rates, to captured data | |
| Identify and use PHY information provided within pseudo-headers in protocol analyzers | - Pseudo-Header formats
- Key pseudo-header content
|
| Recognize the limits of protocol analyzers to capture PHY information including NULL data packets and PHY headers | |
| Use appropriate capture devices based on proper understanding of PHY types | - Supported PHYs - Supported spatial streams |
MAC Sublayer and Functions - 25% | |
| Understand frame encapsulation and frame aggregation | - Frame aggregation (A-MSDU and A-MPDU) |
| Identify and use MAC information in captured data for analysis | - Management, Control, and Data frames - MAC frame formats and contents
- 802.11 Management frame formats
- Data and QoS Data frame formats
|
| Validate BSS configuration through protocol analysis | - Country code - Minimum basic rate - Supported rates and coding schemes - Beacon interval - WMM settings - RSN settings - HT/VHT/HE operations - Channel width - Primary channel - Hidden or non-broadcast SSIDs |
| Identify and analyze CRC error frames and retransmitted frames | |
WLAN Medium Access - 10% | |
| Understand 802.11 contention algorithms in-depth and know how they impact WLANs | - Distributed Coordination Function (DCF)
- Enhanced Distributed Channel Access (EDCA)
- Wi-Fi Multimedia (WMM)
|
| Analyze QoS configuration and operations | - Verify QoS parameters in capture files - Ensure QoS is implemented end-to-end |
802.11 Frame Exchanges - 30% | |
| Capture, understand, and analyze BSS discovery and joining frame exchanges | - BSS discovery - 802.11 Authentication and Association - 802.1X/EAP exchanges - Pre-Shared Key authentication - Four-way handshake - Group key exchange - Simultaneous Authentication of Equals (SAE) - Opportunistic Wireless Encryption (OWE) - WPA2 and WPA3 - Fast secure roaming mechanisms
- Neighbor discovery (802.11k/v)
|
| Analyze roaming behavior and resolve problems related to roaming | - Sticky clients - Excessive roaming - Channel aggregation for roaming analysis |
| Analyze data frame exchanges | - Data frames and acknowledgement frames - RTS/CTS data frame exchanges - QoS Data frame exchanges - Block Acknowledgement exchanges |
| Analyze MIMO and multiuser-specific transmission methods | - MIMO
- OFDMA
|
| Analyze behavior and solve problems related to MAC layer operations | - Power Save operations - Protection mechanisms - Load balancing - Band Steering |
Attraction of High Pass Rate
As the authoritative provider of CWAP-404 actual exam, we always pursue high pass rate compared with our peers to gain more attention from those potential customers. We guarantee that if you follow the guidance of our learning materials, you will pass the exam without a doubt and get a certificate. Our CWAP-404 exam practice is carefully compiled after many years of practical effort and is adaptable to the needs of the exam. If you eventually fail the exam, we will refund the fee according to the contract. We are confident that in the future, our CWAP-404 guide questions: Certified Wireless Analysis Professional will be more attractive and the pass rate will be further enhanced.
CWNP CWAP-404 Exam Certification Details:
| Duration | 90 minutes |
| Sample Questions | CWNP CWAP-404 Sample Questions |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Exam Price | $275 USD |
| Exam Name | Wireless Analysis Professional |
| Passing Score | 70% |
| Exam Code | CWAP-404 CWAP |
| Recommended Training | CWAP self-paced training kit, Training Class |
Reference: https://www.cwnp.com/uploads/cwap-404-objectives-final.pdf
Online and Thoughtful Service
Once you have any questions about our CWAP-404 actual exam, you can contact our staff online or send us an email. We have a dedicated all-day online service to help you solve problems. Before purchasing, you may be confused about what kind of CWAP-404 guide questions: Certified Wireless Analysis Professional you need. You can consult our staff online. After the consultation, your doubts will be solved and you will choose the learning materials that suit you. Our online staff is professionally trained and they have great knowledge. So they can clearly understand your requirements and ideas and then help you make the right choices. When you have purchased our CWAP-404 exam practice, but you do not know how to install it, we can also provide remote guidance to help you complete the installation. In a word, we still provide you with sincere after-sales service. All in all, we will always be there to help you until you pass the CWAP-404 exam and get a certificate.
As we all know, the CWNP certificate has a very high reputation in the global market and has a great influence. But how to get the certificate has become a headache for many people. Our learning materials provide you with an opportunity. Once you choose our CWAP-404 exam practice, we will do our best to provide you with a full range of thoughtful services. Our products are designed from the customer's perspective, and experts that we employed will update our learning materials according to changing trends to ensure the high quality of the materials. What are you still waiting for? Choosing our CWAP-404 guide questions: Certified Wireless Analysis Professional and work for getting the certificate, you will make your life more colorful.
Getting the Most Rewards in the Least Time
We don't just want to make profitable deals, but also to help our users pass the exams with the least amount of time to get a certificate. Choosing our CWAP-404 exam practice, you only need to spend 20-30 hours to prepare for the exam. Maybe you will ask whether such a short time can finish all the content, we want to tell you that you can rest assured ,because our learning materials are closely related to the exam outline and the questions of our CWAP-404 guide questions: Certified Wireless Analysis Professional are related to the latest and basic knowledge. What's more, our learning materials are committed to grasp the most knowledgeable points with the fewest problems. So 20-30 hours of study is enough for you to deal with the exam. When you get a CWAP-404 certificate, you will be more competitive than others, so you can get a promotion and your wages will also rise your future will be controlled by yourselves.
914 Customer Reviews
