Authentic Best resources for 2V0-12.24 Test Engine Practice Exam
[2025] 2V0-12.24 PDF Questions - Perfect Prospect To Go With VCE4Plus Practice Exam
NEW QUESTION # 11
Which option should be chosen when placing a vSAN host into maintenance mode to ensure all data remains accessible during maintenance, while minimizing the time required to complete the operation?
- A. Full Data Migration
- B. Ensure Accessibility
- C. Quick Migration
- D. No Data Migration
Answer: B
Explanation:
When placing a vSAN host into maintenance mode, choosing "Ensure Accessibility" ensures that all data remains accessible during the maintenance operation. It moves data off the host only if necessary, prioritizing accessibility while minimizing downtime. This option is designed to minimize the time required to complete the operation compared to "Full Data Migration."
NEW QUESTION # 12
Which two SDDC Manager operations can be executed on an NSX Edge cluster after it has been deployed? (Choose two.)
- A. Redeploy
- B. Delete
- C. Expand
- D. |Sync
- E. Shrink
Answer: B,D
Explanation:
After an NSX Edge cluster has been deployed, you can perform a sync operation to ensure the NSX Edge cluster is in sync with the configuration in SDDC Manager.
Deleting an NSX Edge cluster can be done after it has been deployed if it is no longer required or needs to be removed from the environment.
NEW QUESTION # 13
An administrator needs to configure Network IO Control (NIOC) on a Virtual Distributed Switch (VDS) to prioritize storage traffic over other types of traffic.
Which two steps should be followed? (Choose two.)
- A. Assign shares and limits to the new port group to prioritize the storage traffic.
- B. Create a new port group specifically for storage traffic.
- C. Disable all other traffic types to ensure storage traffic gets full bandwidth.
- D. Navigate to the VDS settings in the vSphere Client and enable NIOC.
- E. Migrate all VM traffic to a standard switch.
Answer: A,D
Explanation:
Network IO Control (NIOC) must be enabled on the Virtual Distributed Switch (VDS) via the vSphere Client to begin configuring and managing bandwidth allocation and prioritization for different types of traffic.
After enabling NIOC, you can assign shares and limits to the specific port group (in this case, for storage traffic) to prioritize the traffic over other types of network traffic.
NEW QUESTION # 14
An administrator is tasked with troubleshooting an issue where some VMs are not appearing in the vCenter inventory after a recent migration to a new vSphere environment.
Which two components should the administrator examine to resolve this issue? (Choose two.)
- A. The vSphere permissions assigned to the VMs.
- B. The registration status of the VMs in the new vSphere environment.
- C. The network settings of the new vSphere environment.
- D. The compatibility of the VM hardware version with the new vSphere environment.
- E. The storage policies applied to the VMs.
Answer: B,D
Explanation:
If the hardware version of the virtual machines is incompatible with the new vSphere environment, the VMs may not appear or may fail to register properly. Ensuring compatibility between the VM hardware version and the vSphere environment is essential for successful VM migration.
If the VMs are not correctly registered in the new vSphere environment after migration, they won't show up in the vCenter inventory. Checking the registration status helps to identify if this is the issue.
NEW QUESTION # 15
As part of the preparation for deploying VMware Aria Suite Lifecycle, an administrator needs to create Application Virtual Networks (AVNs).
Which three steps are necessary to complete the configuration of AVNs? (Choose three.)
- A. Configure the AVNs in the NSX Manager.
- B. Assign AVNs to specific ESXi hosts.
- C. Enable AVNs in the vCenter Server.
- D. Define the IP address ranges for the AVNs.
- E. Setup routing policies for AVNs.
Answer: A,B,D
Explanation:
Configure the AVNs in the NSX Manager: AVNs (Application Virtual Networks) are configured within NSX Manager to define the network segments and ensure proper network segmentation for workloads.
Assign AVNs to specific ESXi hosts: After configuring the AVNs in NSX Manager, they need to be assigned to the appropriate ESXi hosts to ensure they are properly mapped to the compute resources.
Define the IP address ranges for the AVNs: Each AVN must have an associated IP address range to provide network addressing for the workloads deployed on them.
NEW QUESTION # 16
An organization is looking to streamline its IT service delivery by automating the deployment of applications and infrastructure across its hybrid cloud environment.
Which VMware Aria Suite component should they use?
- A. Aria Automation
- B. Aria Operations for Logs
- C. Aria Operations
- D. Aria Operations for Networks
Answer: A
Explanation:
Aria Automation (formerly vRealize Automation) is designed to automate the deployment of applications and infrastructure across hybrid cloud environments. It enables the provisioning, management, and orchestration of IT services, helping organizations streamline their service delivery.
NEW QUESTION # 17
What is the recommended method for managing IP address allocation for VMware ESXi hosts in a VMware Cloud Foundation environment?
- A. Dynamic IP addresses assigned via DHCP and without any reservations
- B. Static IP addresses assigned manually
- C. Dynamic IP addresses assigned via DHCP with reservations
- D. Static IP address assigned using VMware NSX IP Pools
Answer: D
Explanation:
In a VMware Cloud Foundation environment, it is recommended to use static IP addresses that are managed via VMware NSX IP Pools. This method ensures consistency, scalability, and centralized management of IP addresses, which is essential for large environments. NSX IP Pools allow for efficient IP address allocation and management.
NEW QUESTION # 18
An administrator needs to deploy a Kubernetes cluster on a vSphere IaaS control plane (formerly vSphere with Tanzu) to host a new application.
Which three steps should be followed to successfully deploy the Kubernetes cluster? (Choose three.)
- A. , Deploy a vSphere Pod Service.
- B. Configure a Load Balancer for the Kubernetes control plane nodes.
- C. Configure a vSphere Namespace and assign resource quotas.
- D. Enable Workload Management on the vSphere Cluster.
- E. Create a new VM template for the Kubernetes nodes.
Answer: B,C,D
Explanation:
A Load Balancer is needed for the Kubernetes control plane nodes to distribute traffic across the control plane and ensure high availability for the Kubernetes management layer.
A vSphere Namespace must be configured to define a logical boundary for Kubernetes workloads, and resource quotas help ensure that resources are allocated appropriately for the workloads.
Enabling Workload Management on the vSphere Cluster is necessary to integrate Kubernetes with vSphere and manage the lifecycle of Kubernetes clusters using vSphere with Tanzu.
NEW QUESTION # 19
An organization needs to perform maintenance on a specific host in a vSAN cluster. An administrator is required to put the host into maintenance mode whilst ensuring that all VMs in the cluster remain accessible.
Which three steps should the administrator take to correctly set a vSAN host into maintenance mode? (Choose three.)
- A. Right-click the host and select "Enter Maintenance Mode."
- B. Choose the "Ensure Accessibility" option to maintain data accessibility.
- C. Migrate all VMs manually from the host before enabling maintenance mode.
- D. Navigate to the vSAN cluster in the vSphere Client and select the host.
- E. Select the "No Data Migration" option to speed up the process.
Answer: A,B,D
Explanation:
The "Ensure Accessibility" option ensures that all data remains accessible during maintenance while minimizing the impact on performance and data migration.
The administrator must navigate to the vSAN cluster in the vSphere Client to select the host for maintenance mode.
Right-clicking the host and selecting "Enter Maintenance Mode" is the standard action for placing a host into maintenance mode.
NEW QUESTION # 20
What are three prerequisites for deploying an NSX Edge cluster in a VMware Cloud Foundation solution? (Choose three.)
- A. Create DNS entries for the NSX Edge nodes.
- B. Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.
- C. Set up vSAN storage policies for the Edge VMs.
- D. Assign separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.
- E. Install Aria Operations and enable Edge Cluster monitoring.
Answer: A,B,D
Explanation:
The NSX host overlay VLAN and NSX Edge overlay VLAN need to be routed to each other to ensure proper communication between the host and NSX Edge clusters.
DNS entries for the NSX Edge nodes are required to enable name resolution, which is important for the proper functioning of the NSX Edge cluster.
Assigning separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks is necessary to maintain network isolation and optimize traffic flow between components.
NEW QUESTION # 21
An administrator's passwords for their NSX 'root', 'admin', and 'audit' accounts in the Cloud Foundation management domain expired. The administrator logged into the NSX Manager console and changed the passwords for all three accounts. The passwords are now showing a status of "Disconnected" in the SDDC Manager UI.
- A. In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Remediate.
- B. In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Sync.
- C. In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Rotate.
- D. In order to correct this issue, how can SDDC Manager be updated with the new passwords?
Answer: C
Explanation:
To resolve the issue of disconnected accounts in SDDC Manager after password changes, the administrator must navigate to the Password Management section in the SDDC Manager UI. From there, the administrator can select the affected account, click the vertical ellipsis (three dots), and choose Update to enter the new password for that account, ensuring SDDC Manager is synced with the correct credentials.
NEW QUESTION # 22
An organization wants to centralize its VM templates, ISO images, and scripts to streamline deployment processes across multiple sites using Content Libraries.
Which three steps are required to create a new Content Library? (Choose three.)
- A. Choose "Create a new library" and enter a name and description for the library.
- B. Configure the library to automatically sync with the vSphere Update Manaqer.
- C. Select "Local content library" and choose the datastore to store the library contents.
- D. Add the necessary permissions to allow users to upload content to the library.
- E. Navigate to the Content Libraries section in the vSphere Client.
Answer: A,C,E
Explanation:
When creating a new Content Library, you first need to specify a name and description to define the library's purpose.
For a Local Content Library, you need to choose the datastore where the library contents will be stored. This is essential for proper organization and accessibility of content.
To create and manage content libraries, you must navigate to the Content Libraries section in the vSphere Client.
NEW QUESTION # 23
A company wants to enhance the network virtualization and security capabilities within their VMware Cloud Foundation environment. The goal is to block traffic even between virtual machines connected to the same logical segment (L2 network) using micro segmentation.
Which component can achieve the company's goals?
- A. Network Detection and Response
- B. VMware vDefend
- C. Intrusion Prevention System
- D. VMware NSX Intelligence
Answer: D
Explanation:
VMware NSX Intelligence is a component of VMware NSX that provides micro-segmentation capabilities, enabling the company to block traffic between virtual machines even if they are connected to the same logical segment (Layer 2 network). It enhances security by applying fine-grained security policies at the virtual machine level, preventing unauthorized communication.
NEW QUESTION # 24
What is the first step in the process of setting an ESXi host into maintenance mode?
Response:
- A. Remove the host from the cluster
- B. Disable DRS on the host
- C. Disconnect the host from vCenter
- D. Migrate virtual machines to another host
Answer: D
NEW QUESTION # 25
Match the vSAN troubleshooting tasks with their corresponding tools.
A) Resolving disk failures
B) Updating vSAN drivers
C) Checking vSAN health
D) Recovering from a controller failure
1) Use the ESXCLI tool
2) Use the vSAN health plugin in vSphere Client
3) Use the hardware diagnostics tool
4) Use the Skyline Health Insights
Response:
- A. A-4, B-1, C-3, D-2
- B. A-2, B-1, C-3, D-4
- C. A-3, B-1, C-2, D-4
- D. A-2, B-3, C-4, D-1
Answer: C
NEW QUESTION # 26
What are the steps to apply software updates in a VMware Cloud Foundation deployment using the VMware Async Patch CLI Tool?
- A. Upload the patch bundle to SDDC Manager, download the confirmation, and then apply the patch.
- B. Apply the patch directly in the VMware SDDC Manager UI from the Software Depot.
- C. Download the patch bundle, apply the patch directly, and then upload the confirmation to SDDC Manager.
- D. Download the patch bundle, upload the bundle to SDDC Manager, and then apply the patch.
Answer: D
Explanation:
To apply software updates in a VMware Cloud Foundation deployment using the VMware Async Patch CLI Tool, the process involves downloading the patch bundle, uploading it to SDDC Manager, and then using the appropriate commands or tools to apply the patch. This ensures that the patch is properly staged in the environment and applied to the necessary components.
NEW QUESTION # 27
An administrator needs to perform lifecycle management for their VMware Cloud Foundation components, including upgrading the SDDC Manager.
Which three steps should be followed to successfully upgrade VMware Cloud Foundation? (Choose three.)
- A. Manually download the update bundles with a secure browser from the VMware website.
- B. Disable DRS and HA on all clusters before initiating the upgrade.
- C. Perform a pre-check to ensure that all components are compatible with the new version.
- D. Backup all VMware Cloud Foundation components before starting the upgrade.
- E. Use the SDDC Manager Ul to initiate the upgrade process.
Answer: C,D,E
Explanation:
Backing up all VMware Cloud Foundation components ensures that data is protected in case the upgrade process encounters issues.
Performing a pre-check is important to verify that all components are compatible with the new version to avoid compatibility issues during the upgrade process.
The SDDC Manager UI is used to initiate the upgrade process, providing a guided and consistent method for upgrading the VMware Cloud Foundation environment.
NEW QUESTION # 28
An IT team needs to ensure compliance and security for various database workloads managed by Data Services Manager.
Which three features of Data Services Manager should be leveraged to achieve this? (Choose three.)
- A. Encryption of data at rest and in transit.
- B. Automated patch management for database instances.
- C. Integration with NSX for network security policies.
- D. vSphere DRS for resource scheduling.
- E. Role-based access control (RBAC) to restrict database access.
Answer: A,B,E
Explanation:
Automated patch management ensures that database instances are kept up-to-date with the latest patches, which is essential for maintaining compliance and security.
Encryption of data at rest and in transit helps protect sensitive database data from unauthorized access and tampering, ensuring compliance with security standards.
Role-based access control (RBAC) restricts database access based on user roles, ensuring that only authorized users have access to sensitive data, which is crucial for compliance and security.
NEW QUESTION # 29
When commissioning new hosts in VMware Cloud Foundation, which three parameters must be provided? (Choose three.)
- A. Storage Type
- B. Hardware Type
- C. Username
- D. SSO Domain Name
- E. Network Pool Name
- F. ESXi Version
Answer: A,C,D
Explanation:
Storage Type: The storage type needs to be specified during the commissioning of new hosts in VMware Cloud Foundation, as it is important for the configuration of storage resources for the hosts.
SSO Domain Name: The Single Sign-On (SSO) domain is an essential parameter to associate the hosts with the existing authentication domain.
Username: The administrator needs to provide a username with appropriate permissions to configure the hosts during the commissioning process.
NEW QUESTION # 30
......
Best updated resource for 2V0-12.24 Online Practice Exam: https://www.vce4plus.com/VMware/2V0-12.24-valid-vce-dumps.html
Realistic Practice 2V0-12.24 VMware vSphere Foundation 5.2 Administrator Exam Braindumps: https://drive.google.com/open?id=1c09HDjUS3aqIoRwyDYhYKBEZ5gvGv8iY