Fortinet Certified Professional FCP_FAZ_AN-7.6 Practice Test Engine: Try These 68 Exam Questions
Guaranteed Success in Fortinet Certified Professional FCP_FAZ_AN-7.6 Exam Dumps
NEW QUESTION # 39
Which two statements about playbook execution are true? (Choose two)
- A. FortiAnalyzer will not commit changes made by a Failed playbook
- B. The Playbook Monitor provides troubleshooting logs
- C. You can <un the default debugging playbook to investigate playbook errors.
- D. Even I the playbook status is Failed, individual tasks may have succeeded.
Answer: A,B
NEW QUESTION # 40
Refer to the exhibit. What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. To build a chart automatically based on the top 100 log entries
- B. To add a new chart under FortiView to be used in new reports
- C. To add charts directly to generate reports in the current ADOM.
- D. To build a dataset and chart based on the filtered search results
Answer: D
Explanation:
A quick way to build a custom dataset and chart is to use the chart builder tool. This tool is located in LogView, and allows you to build a dataset and chart automatically, based on your filtered search results. In LogView, set filters to return the logs you want.
NEW QUESTION # 41
You find that as part of your role as an analyst, you frequently search log View using the same parameters.
Instead of defining your search filters repeatedly, what can you do to save time?
- A. Configure a custom view.
- B. Configure a custom dashboard.
- C. Configure a marco and apply it to device groups.
- D. Configure a data selector.
Answer: A
Explanation:
When you frequently use the same search parameters in FortiAnalyzer's Log View, setting up a reusable filter or view can save considerable time.
Option B - Configure a Custom View:
Custom views in FortiAnalyzer allow analysts to save specific search filters and configurations. By setting up a custom view, you can retain your frequently used search parameters and quickly access them without needing to reapply filters each time. This option is specifically designed to streamline the process of recurring log searches.
NEW QUESTION # 42
You need to move reports between two ADOMs.
Which two statements are true? (Choose two.)
- A. The ADOMs must be compatible types.
- B. The data and time will be appointed to the original report name to avoid conflicts.
- C. You need to convert the reports into templates first.
- D. All charts and datasets associated with the report will be imported together.
Answer: A,D
NEW QUESTION # 43
Exhibit. What can you conclude about these search results? (Choose two.)
- A. They are sortable by columns and customizable.
- B. They were searched by using text mode.
- C. They can be downloaded to a file.
- D. They are not available for analysis in FortiView.
Answer: B,C
Explanation:
In this exhibit, we observe a search query on the FortiAnalyzer interface displaying log data with details about the connection events, including fields like date, srcip, dstip, service, and dstintf.
This setup allows for several functionalities within FortiAnalyzer.
A). They can be downloaded to a file.
The icon at the top right that looks like a download symbol suggests the results can be exported or downloaded.
D). They were searched by using text mode.
The display format of the log entries in raw text with detailed fields (e.g., date=, time=, srcip=, etc.) indicates that text mode was used for the search rather than a summarized or GUI-based log view.
NEW QUESTION # 44
Which SQL query is in the correct order to query to database in the FortiAnalyzer?
- A. SELECT devid FROM $log GROUP BY devid WHERE `user',,' users1'
- B. SELECT devid FROM $log WHERE `user'=' GROUP BY devid
- C. SELCT devid WHERE 'user'-` USER1' FROM $log GROUP By devid
- D. SELECT FROM $log WHERE devid `user',, USER1' GROUP BY devid
Answer: B
Explanation:
In FortiAnalyzer's SQL query syntax, the typical order for querying the database follows the standard SQL format, which is:
SELECT <column(s)> FROM <table> WHERE <condition(s)> GROUP BY <column(s)> Option D correctly follows this structure:
SELECT devid FROM $log: This specifies that the query is selecting the devid column from the
$log table.
WHERE 'user' = ': This part of the query is intended to filter results based on a condition involving the user column. Although there appears to be a minor typographical issue (possibly missing the user value after =), it structurally adheres to the correct SQL order. GROUP BY devid: This groups the results by devid, which is correctly positioned at the end of the query.
NEW QUESTION # 45
Which two statements regarding FortiAnalyzer operating modes are true? (Choose two.)
- A. A topology with FortiAnalyzeer devices running in both modes can improve their performance.
- B. You can create and edit reports when FortiAnalyzer is running in collector mode.
- C. When running in collector mode, FortiAnalyzer can forward logs to a syslog server.
- D. FortiAnalyzer runs in collector mode by default unless it is configured for HA.
Answer: A,D
Explanation:
FortiAnalyzer has two primary operating modes: Analyzer mode and Collector mode. Each mode serves specific purposes and has distinct capabilities.
Option B - Default Mode is Collector Mode Unless Configured for HA:
When a FortiAnalyzer is initially set up, it runs in Collector mode by default unless it is configured as part of a High Availability (HA) setup, which would set it to Analyzer mode. Collector mode prioritizes log collection and storage rather than analysis, offloading analysis to other devices in the network.
Option D - Performance Improvement with Both Modes in Topology:
Deploying FortiAnalyzer devices in both Collector and Analyzer modes in a network topology can enhance performance. Collector mode devices handle log collection, reducing the workload on Analyzer mode devices, which focus on log processing, analysis, and reporting. This separation of tasks can optimize resource usage and improve the overall efficiency of log management.
NEW QUESTION # 46
Exhibit. What can you conclude about the output?
- A. The output is ADOM specific
- B. The message rate being lower that the log rate is normal.
- C. There are more traffic logs than event logs.
- D. Both messages and logs are almost finished indexing.
Answer: B
NEW QUESTION # 47
You discover that a few reports are taking a long tine lo generate. Which two steps can you Like to troubleshoot? (Choose two.)
- A. Increase the ADOM reports quota
- B. Remove old reports from the hcache
- C. Review report diagnostics
- D. Enable auto-cache and run the reports again
Answer: B,D
NEW QUESTION # 48
Which two statement regarding the outbreak detection service are true? (Choose two.)
- A. Outbreak alerts are available on the root ADOM only.
- B. It automatically downloads new event handlers and reports.
- C. An additional license is required.
- D. New alerts are received by email.
Answer: B,C
Explanation:
The FortiAnalyzer Outbreak Detection Service is a licensed feature that requires a valid license to access outbreak alerts, event handlers, and reports. Without a valid license, these features are not available, and only a default alert page is shown.
When licensed, the service automatically downloads outbreak-related event handlers and reports from FortiGuard, enabling timely detection and response to emerging malware outbreaks.
https://docs.fortinet.com/document/fortianalyzer/7.0.0/new-features/371125/fortiguard-outbreak- detection-service
https://docs.fortinet.com/document/fortianalyzer/7.6.3/administration-guide/658619/outbreak- alerts
NEW QUESTION # 49
Which database language does FortiAnalyzer support for the purposes of logging and reporting?
- A. LDAP
- B. SSH
- C. SQL
- D. XML
Answer: D
NEW QUESTION # 50
Which statement about the FortiSOAR management extension is correct?
- A. It requires a dedicated FortiSOAR device or VM.
- B. It does not include a limited trial by default.
- C. It runs as a docker container on FortiAnalyzer.
- D. It requires a FortiManager configured to manage FortiGate.
Answer: A
Explanation:
The FortiSOAR management extension is designed as an independent security orchestration, automation, and response (SOAR) solution that integrates with other Fortinet products but requires its own dedicated device or virtual machine (VM) environment. FortiSOAR is not natively integrated as a container or service within FortiAnalyzer or FortiManager, and it operates separately to manage complex security workflows and incident responses across various platforms.
NEW QUESTION # 51
Which two FortiAnalyzer features allow you to automatically build a dataset and chart based on a filtered search result? (Choose two.)
- A. Custom View
- B. Chart Builder
- C. Export to Report Chart (FortiView)
- D. Dataset Library
Answer: B,C
NEW QUESTION # 52
Exhibit. What can you conclude from this output?
- A. The allocated disk quote to ADOM1 is 3 GB.
- B. FGT_B is the Security Fabric root.
- C. There is not disk quota allocated to quarantining files.
- D. Archive logs are using more space than analytic logs.
Answer: A
Explanation:
The exhibit displays a diagnose log device output on a FortiAnalyzer, showing details about disk space usage and quotas for different FortiGate devices and ADOMs (Administrative Domains).
Here's a breakdown of key details:
Disk Quota for Quarantined Files:
The output includes columns labeled for used space in categories such as "logs," "quarantine,"
"content," and "DB." For each device, the quarantine column consistently shows 0.0KB used, indicating that there is no disk quota allocated or utilized for quarantining files.
NEW QUESTION # 53
Why must you wait for several minutes before you run a playbook that you just created?
- A. FortiAnalyzer needs that time to debug the new playbook.
- B. FortiAnalyzer needs that time to parse the new playbook.
- C. FortiAnalyzer needs that time to ensure there are no other playbooks running.
- D. FortiAnalyzer needs that time to back up the current playbooks.
Answer: B
Explanation:
When a new playbook is created on FortiAnalyzer, the system requires some time to parse and validate the playbook before it can be executed. Parsing involves checking the playbook's structure, ensuring that all syntax and logic are correct, and preparing the playbook for execution within FortiAnalyzer's automation engine. This initial parsing step is necessary for FortiAnalyzer to load the playbook into its operational environment correctly.
NEW QUESTION # 54
Which statement about exporting items in Report Definitions is true?
- A. Chart exports contain associated datasets.
- B. Templates can be exported.
- C. Datasets can be exported.
- D. Template exports contain associated charts and datasets.
Answer: D
NEW QUESTION # 55
You are tasked with finding logs corresponding to a suspected attack on your network. You need to use an interface where all identified threats within timeframe are listed and organized. You also need to be able to quickly export the information to a PDF file.
Where can you go to accomplish this task?
- A. FortiView
- B. Fabric View
- C. Log Browse
- D. Log View
Answer: A
Explanation:
FortiView is a comprehensive monitoring system on FortiAnalyzer that integrates real-time and historical data into a single view, including threats. It provides intuitive summary dashboards listing top threats, sources, destinations, and more, all filterable by timeframe and other criteria.
FortiView allows drill-down into detailed threat information and supports exporting data and reports, including to PDF format, facilitating quick sharing and analysis.
https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/96300/using-the-fortiview- interface
NEW QUESTION # 56
......
Test Engine to Practice FCP_FAZ_AN-7.6 Test Questions: https://www.vce4plus.com/Fortinet/FCP_FAZ_AN-7.6-valid-vce-dumps.html
Fortinet FCP_FAZ_AN-7.6 Daily Practice Exam New 2026 Updated 68 Questions: https://drive.google.com/open?id=1GY8H6ue9y5xQ-Nq9Dy6OMAx-sCOPu7d5