2021 350-601 Premium Files Test pdf - Free Dumps Collection
Get ready to pass the 350-601 Exam right now using our CCNP Data Center Exam Package
Cisco DCCOR 350-601 Practice Test Questions, Cisco DCCOR 350-601 Exam Practice Test Questions
Successfully completing the Cisco 350-601 DCCOR: Implementing Cisco Data Center Core Technologies exam makes you eligible for the following certifications: CCIE Data Center, CCNP Data Center, and Cisco Certified Specialist – Data Center Core.
NEW QUESTION 29
A host in EPG Client wants to talk to a webserver in EPG Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80.
Which statement describes this scenario?
- A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
- B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port
80. - D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80.
Answer: D
Explanation:
Section: Security
NEW QUESTION 30
A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 31
Refer to the exhibit.
Which VLANs are capable to be assigned on vPC interfaces?
- A. 100-105
- B. 100-102
- C. 100-103
- D. 100-104
Answer: A
NEW QUESTION 32
An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit <filename> command on the switch?
- A. The switch is restarted after the upgrade is complete.
- B. The previous package that was in use is deleted from bootflash.
- C. The package is used in the running configuration.
- D. The package is used after the switch is restarted
Answer: D
NEW QUESTION 33
The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant dat a. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)
- A. Option E
- B. Option D
- C. Option B
- D. Option A
- E. Option C
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/white-paper-c11-733022.html The information to be sent is regarding dropped packets only.
NEW QUESTION 34
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 192.168.254.1
- B. 239.255.70.83
- C. 192.168.254.2
- D. 192.168.254.4
Answer: D
NEW QUESTION 35 
Refer to the exhibit. What is the result of implementing the configuration?
- A. The RADIUS server timeout value is 15 milliseconds.
- B. Only the RADIUS server is used for authentication.
- C. RADIUS traffic is sourced from the VLAN 200 interface.
- D. Users specify the RADIUS server when they log in.
Answer: B
Explanation:
Section: Security
NEW QUESTION 36 
Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 37
Refer to the exhibit.
Which statement about the default gateway configuration of the vPC is true?
- A. N7K-2 acts as the default gateway for all traffic.
- B. Either switch can act as the active default gateway.
- C. N7K-1 acts as the default gateway for all traffic.
- D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
Answer: B
NEW QUESTION 38
Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.
Answer:
Explanation:
NEW QUESTION 39
A small remote office is set to connect to the regional hub site via NSSA ASBR.
Which type of LSA is sent to the remote office OSPF area?
- A. type 3 LSA
- B. type 1 LSA
- C. type 5 LSA
- D. type 7 LSA
Answer: D
NEW QUESTION 40
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. Open NX-OS
- B. NX-API Sandbox
- C. Guest Shell for NX-OS
- D. NX-OS JSON-RPC
Answer: B
Explanation:
Section: Automation
Explanation/Reference:
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox
NEW QUESTION 41
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The switch queries the TACACS+ server by using an encrypted text PAP login.
- B. The timeout value on the TACACS+ server is 10 seconds.
- C. The switch queries the TACACS+ server by using a clear text PAP login.
- D. The TACACS+ server uses the type-6 encrypted format.
Answer: A
NEW QUESTION 42
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal. Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device public IP address
- B. device serial number
- C. device FQDN
- D. device claim code
- E. device ID
Answer: A,C
NEW QUESTION 43
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
- A. It always is enabled on 10/100-Mbps native Ethernet ports.
- B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
- C. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
- D. It provides the authentication of peers on the Cisco Nexus switch.
Answer: C
NEW QUESTION 44
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. adapters
- B. IOMs
- C. BIOS
- D. board controller
- E. Cisco UCS Manager
Answer: C,D
NEW QUESTION 45
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?
- A. interface ethernet 1/2
passive-interface default - B. Interface ethernet 1/2
Ip ospf network point-to-point - C. interface ethernet 1/2
ip ospf passive-interface - D. interface ethernet 1/2
no ip ospf passive-Interface
Answer: C
NEW QUESTION 46
Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose Two)
- A. The address must reach the age limit that is configured for the interface.
- B. The device must be restarted manually.
- C. Shutdown and then no shutdown must be run on the interface.
- D. The address must be removed from the configuration.
- E. The interface must be converted to a routed port.
Answer: D,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/security/configuration/guide/b_Cisco_N
NEW QUESTION 47
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 48
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)
- A. Configure the switchport monitor under interface fc2/2
- B. Configure the switchport mode SD under interface fc2/2.
- C. Configure switchport speed 4000 under interface fc2/2.
- D. Configure the switchport mode SD under interface tc2/1.
- E. Configure session type fc under monitor session 1.
Answer: A,C
NEW QUESTION 49
The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)
- A. Option E
- B. Option D
- C. Option B
- D. Option A
- E. Option C
Answer: A,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/white-paper-c11-733022 The information to be sent is regarding dropped packets only.
NEW QUESTION 50
What is an advantage of steaming telemetry over SNMP?
- A. MD-5based authentication on polling
- B. periodic push-based subscription messages
- C. on-change traps sent to a receiver
- D. periodic polling of the device status
Answer: B
NEW QUESTION 51
An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION 52
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.
Which method does Cisco recommend to configure the SAN boot?
- A. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
- B. Define the vHBAs as bootable and leave the boot target definition empty.
- C. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
- D. Define the vHBAs as bootable and leave the default values on the boot target definition.
Answer: C
NEW QUESTION 53
......
Skills Outline of Cisco 350-601 Exam
The Cisco 350-601 exam is presented to the candidates in a wide range of topics, which indicate the skills measured. Here they are:
- Automation (15%)
In the framework of this topic, the individuals need to show their competency in implementing automation and scripting tools, including REST API, EEM, Scheduler, Guest Shell and Bash Shell for NX-OS, and JSON and XML encodings. Answering the questions within this domain, they also need to be able to evaluate automation as well as orchestration technologies. This means that they should be well conversant with UCSD, DCNM, POAD, PowerShell, Python, Ansible, and Puppet.
- Network (25%)
To answer the questions from this first topic, the test takers need to demonstrate that they have the skills and knowledge required to apply routing protocols (FHRP, PIM, MP-BGP, OSPFv2, OSPFv3), implement network configuration management, and implement infrastructure monitoring such as SPAN and NetFlow. This domain also comprises of skills such as describing software updates and their impacts, which means that the students should understand fabric setup, VMM, tenant policies, and access policies. Also, they will be required to answer the questions related to analyzing Cloud deployment and service models, analyzing packet flow (broadcast, multicast, and unicast), applying overlay protocols such as OTV and VXLAN EVPN, and applying switching protocols, for example, vPC, LACP, and RSTP+.
- Compute (25%)
Answering the questions from this objective, the applicants have to show that they have the capability to implement Cisco Unified Compute System Rack Servers, implement infrastructure monitoring such as Intersight and SPAN, implement compute management configuration (restore and backup), describe software and firmware updates and their effects on C-Series and B-Series servers, and explain HyperFlex Infrastructure with its benefits (all-flash vs Edge and Hybrid Architecture). Besides, within this knowledge area, the learners’ ability to implement Cisco Compute System Blade Chassis is tested. This means that the students must have the skills needed to accomplish initial setup and infrastructure management. They should also demonstrate their knowledge of server management, storage management, and network management (pools and policies, VLANs, templates, QoS).
- Storage Network (20%)
This subject area evaluates the candidates’ proficiency in describing software updates as well as their impacts (EPLD and disruptive/nondisruptive), implementing infrastructure monitoring, describing the NAS and NFS concepts, and implementing FCoE Unified Fabric (DCB and FIP). This topic also encompasses their proficiency in implementing Fiber Chanel. This means that the applicants must have a thorough understanding of zoning, VSAN, NPV and NPIV, device alias, FCNS, CFS, FCID, port channels, and switch fabric initialization.
- Security (15%)
In the last section, the examinees need to demonstrate their expertise in applying network security, including CoPP, ACI contracts, and micro-segmentation, AAA and RBAC, and first-hope security features, such as port security, DHCP snooping, and dynamic ARP inspection. In addition, the candidates will need to show that they can apply to compute security effectively. Last but not least, they will have to answer the questions related to the application of storage security in reference to AAA and RBAC, fabric binding, and port security.
Test Content Outline
The Cisco 350-601 exam covers 5 key knowledge areas that are usually addressed by the CCNP Data Center certificate. These include the following:
- Automation (15%);
- Security (15%).
- Network (25%);
- Compute (25%);
- Storage Network (20%);
Master 2021 Latest The Questions CCNP Data Center and Pass 350-601 Real Exam!: https://www.vce4plus.com/Cisco/350-601-valid-vce-dumps.html
A fully updated 2021 350-601 Exam Dumps exam guide from training expert VCE4Plus: https://drive.google.com/open?id=1kwSGtn5XTbM8E1tyx2jk4YNWC-SwiXsp