[2024] Pass API API-936 Exam in First Attempt Easily [Q55-Q74]

Share

[2024] Pass API API-936 Exam in First Attempt Easily

The Most Efficient API-936 Pdf Dumps For Assured Success 


API-936 Refractory Personnel Certification Exam is designed to test the knowledge and skills of individuals who work in the field of refractory installation, inspection, testing, and repair. Refractory Personnel certification exam is conducted by the American Petroleum Institute (API) and is widely recognized by the industry as a benchmark for refractory personnel. Passing API-936 exam demonstrates that the individual has a thorough understanding of the latest industry standards and practices related to refractory materials and installations.


API 936 is a certification program designed for refractory personnel who are responsible for the inspection, testing, and installation of refractory materials used in various industries such as petrochemical, power generation, and steel production. Refractory Personnel certification exam is conducted by the American Petroleum Institute (API), which is a well-known organization in the oil and gas industry. The API 936 certification program is globally recognized, and passing the exam demonstrates that the candidate has the necessary knowledge and skills to perform refractory-related tasks.


API-936 exam assesses the knowledge of individuals on a range of topics related to refractory materials, including the properties of refractories, application of refractories, installation and quality control. API-936 exam is based on a clear set of standards and guidelines that have been developed by industry experts to ensure that those who pass the exam are well-equipped to handle refractory materials effectively. API-936 exam is a multiple-choice test, consisting of 120 questions, and may take up to four hours to complete.

 

NEW QUESTION # 55
The term that describes the condition of pre-set refractory in which gravitational forces cause it to lose its desired shaped is called

  • A. Punky
  • B. Slumping
  • C. None of the above
  • D. Bloating

Answer: B


NEW QUESTION # 56
A separation between adjoining parts of a refractory lining that allows small expansive movements, such as those caused by thermal change is known as

  • A. Thermal conductivity
  • B. None of the above
  • C. Expansion joint
  • D. Thermal expansion

Answer: C


NEW QUESTION # 57
The surface of a refractory section exposed to the source of heat

  • A. cold face
  • B. hot face
  • C. None of the above
  • D. smooth face

Answer: B


NEW QUESTION # 58
Refractory packing requirements, the weight in the bag, shall not deviate by more than

  • A. ± 2%
  • B. ±1%
  • C. ± 3%
  • D. ± 4%

Answer: A


NEW QUESTION # 59
A combination of refractory grain and suitable bonding agent that, after the addition of a proper liquid, is generally poured into place to form a refractory shape or structure which becomes rigid because of chemical action is called

  • A. castable
  • B. ceramic modules
  • C. all of the above
  • D. mortar

Answer: A


NEW QUESTION # 60
As installed testing is the terminology for testing refractory that was sampled during installation in order to confirm that they meet specified.

  • A. Chemical property standards
  • B. Both as above
  • C. Physical property standards
  • D. None of the above

Answer: C


NEW QUESTION # 61
Which function of refractories is to resist temperature?

  • A. Primary function
  • B. Secondary function
  • C. None of the above
  • D. Tertiary function

Answer: A


NEW QUESTION # 62
Enclosure inside the top head of a reactor or regenerator vessel which supports the cyclones and in which gases exiting the cyclone outlets are collected is called

  • A. Cyclone of FCCU
  • B. Riser of FCCU
  • C. Plenum of FCCU
  • D. None of the above

Answer: C


NEW QUESTION # 63
The test specimen of castable refractory for cold crushing strength shall be

  • A. none of the above
  • B. 2 in. (51mm) cubes
  • C. Cylinders, 2 in. (51mm)in dia. by 2 in.(51 mm) height
  • D. a or b

Answer: D


NEW QUESTION # 64
The loss of fragmented refractories from the face of the refractory structure, through cracking and rupturing which results in the exposure of the original inner portion of the refractory lining is called

  • A. Bypassing
  • B. Sheeting
  • C. Spalling
  • D. Erosion

Answer: C


NEW QUESTION # 65
A condition describing a refractory lining that is soft and friable

  • A. None of the above
  • B. Plunky
  • C. Slumping
  • D. Bloating

Answer: B


NEW QUESTION # 66
A typical example of hexalt anchor is

  • A. All of the above
  • B. S-bar
  • C. Hexcel
  • D. Curl and Tacko anchors

Answer: A


NEW QUESTION # 67
For air-setting phosphate bonded, erosion-resistant refractories mixing, the mixer's paddles, and bowls shall be

  • A. Steel
  • B. Carbon
  • C. Aluminium
  • D. None of the above

Answer: A


NEW QUESTION # 68
The destructive chemical reaction between refractories and external agencies at high temperatures, resulting in the formation of a liquid is called

  • A. Slumping of refractories
  • B. None of the above
  • C. Slagging of refractories
  • D. Dusting of refractories

Answer: C


NEW QUESTION # 69
Refractories that are resistant to chemical attack by both acid and basic slags, refractories, or fluxes at high temperature is

  • A. Basic
  • B. Neutral
  • C. Acid
  • D. None of the above

Answer: B


NEW QUESTION # 70
Section of transfer line in which flow is in an upward direction is called

  • A. Cyclone of FCCU
  • B. Riser of FCCU
  • C. Plenum of FCCU
  • D. None of the above

Answer: B


NEW QUESTION # 71
As per API recommended practice 936, the standard test method for reheat change of refractory brick is

  • A. C113 - 02
  • B. C 133 - 97
  • C. None of the above
  • D. C 181 - 91

Answer: A


NEW QUESTION # 72
The exposure of a material or body to a rapid change in temperature which may have a deleterious effect

  • A. Thermal conductivity
  • B. Thermal shock
  • C. None of the above
  • D. Thermal expansion

Answer: B


NEW QUESTION # 73
Heating the new refractory too rapidly will cause

  • A. Chemical attack
  • B. Explosive spalling
  • C. None of the above
  • D. Structural deterioration

Answer: B


NEW QUESTION # 74
......

We offers you the latest free online API-936 dumps to practice: https://www.vce4plus.com/API/API-936-valid-vce-dumps.html

API API-936 Real Exam Questions Guaranteed Updated Dump: https://drive.google.com/open?id=14F1DQHrN5mz_OQwNDnRtNC2NDpjMk24m