[2025] Earn Quick And Easy Success With NSE7_OTS-7.2 Dumps
Free NSE7_OTS-7.2 pdf Files With Updated and Accurate Dumps Training
Fortinet NSE7_OTS-7.2 exam is a challenging test that requires a significant amount of preparation and study. However, the rewards of passing NSE7_OTS-7.2 exam are significant. Not only will successful candidates have the skills they need to protect their organizations from cyber threats, but they will also have a respected certification that demonstrates their expertise in the field of OT security.
Fortinet NSE7_OTS-7.2 Certification Exam is designed to validate the knowledge and skills of security professionals in the field of operational technology (OT). NSE7_OTS-7.2 exam is part of the Fortinet Network Security Expert (NSE) program, which offers a comprehensive range of certifications to demonstrate expertise in Fortinet products and technologies. The NSE7_OTS-7.2 exam focuses on the Fortinet NSE 7 OT Security 7.2 solution, which is designed to provide advanced security for industrial control systems and other operational technology environments.
NEW QUESTION # 40
Refer to the exhibit. You are assigned to implement a remote authentication server in the OT network. Which part of the hierarchy should the authentication server be part of?
- A. Cloud
- B. Core
- C. Access
- D. Edge
Answer: D
NEW QUESTION # 41
Which three protocols are used as industrial Ethernet protocols? (Choose three.)
- A. RJ45
- B. PROFINET
- C. M12
- D. EtherCAT
- E. EtherNet/IP
Answer: B,D,E
NEW QUESTION # 42
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Set the priority of the C.BO.NA.1 signature override to 1.
- B. Set all application categories to apply default actions.
- C. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
- D. Change the security action of the industrial category to monitor.
Answer: A
Explanation:
Explanation
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 43
Which two statements about FortiSIEM are true? (Choose two.)
- A. FortiSIEM can receive and collect data from network devices and applications.
- B. FortiSIEM cannot receive data from a Windows server without an agent.
- C. FortiSIEM can receive data from certain devices in SQL format.
- D. FortiSIEM can receive data from any network device and application.
Answer: A,B
NEW QUESTION # 44
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, only when they connect for the first time
- B. Rogue devices, each time they connect
- C. All connected devices, each time they connect
- D. Known trusted devices, each time they change location
Answer: A
NEW QUESTION # 45
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- B. Enable two-factor authentication with FSSO.
- C. Under config user settings configure set auth-on-demand implicit.
- D. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
Answer: A
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 46
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM. Which step must the administrator take to achieve this task?
- A. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
- B. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- C. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- D. Create a notification policy and define a script/remediation on FortiSIEM.
Answer: D
Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 47
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other. Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)
- A. Traffic must be inspected by FGT-EDGE in OT networks.
- B. The switch on FGT-2 must be hardware to implement micro-segmentation.
- C. FGT-2 controls intra-VLAN traffic through firewall policies.
- D. Micro-segmentation on FGT-2 prevents direct device-to-device communication.
Answer: C,D
NEW QUESTION # 48
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiNAC determined the user by DHCP fingerprint method
- B. The user was determined by Security Fabric
- C. FortiGate determined the user by passive authentication
- D. Two-factor authentication is not configured with RADIUS authentication method
Answer: C
NEW QUESTION # 49
Which three methods of communication are used by FortiNAC to gather visibility information?
(Choose three.)
- A. TACACS
- B. API
- C. RADIUS
- D. SNMP
- E. ICMP
Answer: B,C,D
NEW QUESTION # 50
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- B. An administrator can create firewall policies in the switch to secure between PLCs.
- C. PLCs use IEEE802.1Q protocol to communicate each other.
- D. There is no micro-segmentation in this topology.
Answer: D
NEW QUESTION # 51
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to forward only company domain website traffic.
- B. FortiGate is configured with forward-domains to forward only domain controller traffic.
- C. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
- D. FortiGate is configured with forward-domains to reduce unnecessary traffic.
Answer: D
NEW QUESTION # 52
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must use a third-party RADIUS OTP server.
- C. You must register the same FortiToken on more than one FortiGate.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 53
Refer to the exhibit.
In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a unique forward domain on each interface on the network.
- B. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
- C. Set FortiGate to operate in transparent mode.
- D. Set a software switch on FortiGate to handle inter-VLAN traffic.
Answer: B
NEW QUESTION # 54
What is the main difference between real-time logs and historical logs on FortiAnalyzer?
- A. Real-time logs are indexed while historical logs are compressed in the SQL database.
- B. Historical logs are compressed and real-time logs are indexed in the SQL database.
- C. Historical logs are indexed in the SQL database, but real-time logs are not.
- D. Real-time logs are indexed in the SQL database, but historical logs are not.
Answer: C
NEW QUESTION # 55
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- B. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- C. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- D. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
Answer: C
NEW QUESTION # 56
......
Real Updated NSE7_OTS-7.2 Questions Pass Your Exam Easily: https://www.vce4plus.com/Fortinet/NSE7_OTS-7.2-valid-vce-dumps.html
Top-Class NSE7_OTS-7.2 Question Answers Study Guide: https://drive.google.com/open?id=1nh_jxjUsHZLEY17-jZeU3nCDM8DoIVRS