Best HPE0-V15 Exam Dumps for the Preparation of Latest HPE0-V15 Exam Questions
Download Latest & Valid Questions For HP HPE0-V15 exam
NEW QUESTION 32
A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.
Answer:
Explanation:
NEW QUESTION 33
A customer has a small business office and is concerned that the local storage in their current ProLiant Gen 10 server with a Linux OS Is reaching maximum capacity Which solution should you recommend to expand the customer's data storage capacity?
- A. StoreOnce
- B. D3000
- C. StoreEver
- D. SimpliVity
Answer: B
NEW QUESTION 34
Which HPE Proliant server should you recommend for a home office environment where the server will be located in the same office as the user?
- A. HPE MicroServer
- B. HPE DL20
- C. HPEXL170r
- D. HPE ML110
Answer: D
NEW QUESTION 35
Refer to the exhibit.
You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.
What should the administrator do to resolve the issue?
- A. Add additional fan modules to the switch.
- B. Replace the fan modules with power-to-port fan modules.
- C. Replace the fan modules with port-to-power fan modules.
- D. Change the fan direction with the fan preferred direction command.
Answer: D
NEW QUESTION 36
When should you choose to populate a server with LRDlMMs?
- A. when memory capacity is the most important factor
- B. when error correction is the most important factor
- C. when price is the most important factor
- D. when memory speed is the most important factor
Answer: D
NEW QUESTION 37
When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?
- A. HPE OneView
- B. Smart Update Manager
- C. HPE iLO Amplifier Pack
- D. Intelligent Provisioning
Answer: D
NEW QUESTION 38
You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?
- A. It will be transmitted in vlan 50.
- B. It will be transmitted in vlan 1.
- C. It will be transmitted in vlan 2
- D. It will be dropped
Answer: D
NEW QUESTION 39
A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?
- A. HPE Proliant for Microsoft Azure Stack
- B. HPE ConvergedSystem 750
- C. HPE Nimble Storage dHCI
- D. HPE OneView for VMware vCenter
Answer: B
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00105348en_us&docLocale=en_US
NEW QUESTION 40
A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?
- A. One IRF stack of wo HPE 5945 2-Slot switches each with the following: One 24-Port SFP28 + 2-Port QSFP28 module One 24-Port 1/10GBASE-T + 2-Port QSFP+ module 10 SFP+ to SFP+ DACs in each switch
- B. One VSX stack of two Aruba 8320 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch Two QSFP+ to Quad SFP+ adapters - C. One VSX stack of two Aruba 8325 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch - D. One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch
Answer: D
NEW QUESTION 41
For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)
- A. Nutanix Prism infrastructure Manager
- B. Microsoft System Center
- C. VMware vCenter
- D. Citrix XenCenter
- E. Red Hat Enterprise Virtualization Manager
Answer: B,C
NEW QUESTION 42
A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for additional equipment that may be added in the future.
How should the solution integrator respond?
- A. HPE G2 Advanced racks allow additional PDUs to be added if additional equipment requires more outlets or more available power
- B. Two HPE Standard G2 PDUs will support 42U of racked equipment, so any equipment added in the future will be accommodated by the current PDU configuration
- C. HPE Standard Series G2 PDUs allow additional inlet power cords to support additional equipment in the future.
- D. HPE PDUs support elevated temperatures up to 75°C (1673F), in case the additional equipment power draw results in increased heat generation.
Answer: B
NEW QUESTION 43
What is a benefit of a NAS device?
- A. iSCSl Protocol services
- B. dedicated file services
- C. SAS connectivity to hosts
- D. shared Block Level access
Answer: B
NEW QUESTION 44
A client needs a data center network for a highly-virtualized server environment. They have the following requirements
* 25 Gb connectivity from the servers to the top-of-rack switches
* support for iSCSl storage
* lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center
* support for Python script interpretation and open APIs
Which networking product line and architecture should you recommend?
- A. ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches
- B. ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing VSX between cabinets
- C. ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf
- D. HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access switches configured using IRF stacks per cabinet
Answer: A
NEW QUESTION 45
A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.
Which storage solution meets this requirement?
- A. Network Attached Storage (NAS)
- B. Storage Area Network (SAN)
- C. Direct Attached Storage (DAS)
- D. Network File System (NFS)
Answer: A
NEW QUESTION 46
Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?
- A. volume mirror
- B. clone
- C. snapshot
- D. virtual volume
Answer: C
NEW QUESTION 47
Exhibit:
Which HPE ProLiant Server meets the customer's requirements?
Which HPE ProLiant Server meets the customer's requirements?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 48
......
Exam Materials for You to Prepare & Pass HPE0-V15 Exam: https://www.vce4plus.com/HP/HPE0-V15-valid-vce-dumps.html
Ensure Success With Updated Verified HPE0-V15 Exam Dumps: https://drive.google.com/open?id=1DNGZj6mc_8QX58lx1TjwibyzLGQEGpw5