Get 100% Authentic F5 201 Dumps with Correct Answers
New Training Course 201 Tutorial Preparation Guide
NEW QUESTION 87
Under what condition must an appliance license be reactivated.
- A. Licenses only have to be
reactivated
when new features are added (IPv6, Routing Modules, etc)El no other situations. - B. Never. Licenses are permanent
for the
platform regardless
the version of software installed. - C. Licenses generally have to be reactivated during system software upgrades.
- D. Licenses only have to be reactivated for RMAs El no other situations.
Answer: C
NEW QUESTION 88
Refer to the exhibit.
An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?
- A. The virtual address does not have route advertising enabled.
- B. The pool associated with the virtual server is falling its health check.
- C. The pool associated with the virtual server does not have priority group activation enabled.
- D. The virtual address does not have ARP enabled.
Answer: D
NEW QUESTION 89
A virtual server at 10.10.1.100:80 has the rule listed below applied. when HTTP_REQUEST { if {[HTTP::uri] ends_with "htm" } { pool pool1 } else if {[HTTP::uri] ends_with "xt" } { pool pool2 } If a user connects to http://10.10.1.100/foo.txt which pool will receive the request?
- A. pool1
- B. None. The request will be dropped.
- C. pool2
- D. Unknown. The pool cannot be determined from the information provided.
Answer: C
NEW QUESTION 90
You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie.
Which four are profiles that would normally be included in the virtual server's definition? (Choose four.)
- A. ServerSSL
- B. HTTPS
- C. ClientSSL
- D. TCP
- E. HTTP
- F. CookieBased Persistence
Answer: C,D,E,F
NEW QUESTION 91
How is persistence configured?
- A. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
- B. Persistence is an option for each pool member. When a pool is defined, each member's definition includes the option for persistence.
- C. Persistence is an option within each pool's definition.
- D. Persistence is a global setting; once enabled, loadbalancing choices are superceded by the persistence method that is specified.
Answer: A
NEW QUESTION 92
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is on the Standby Device
- B. The BIG-IP Administrator is logged in as administrator
- C. The BIG-IP Administrator is NOT logged into command line to tail over
- D. The BIG-IP Administrator is logged in as root
Answer: A
NEW QUESTION 93
A site is load balancing to a pool of web servers. Which statement is true concerning BIG IP's ability to verify whether the web servers are functioning properly or not?
- A. Web server monitors can test whether the server's address is reachable, but cannot test a page's content.
- B. Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.
- C. Web server monitors always verify the contents of the index.html page.
- D. Web server monitors can test the content of any page on the server.
Answer: D
NEW QUESTION 94
A BIG-IP Administrator needs to have a BIG-IP linked to two upstream switches for resilience of the external network. The network engineer who is going to configure the switch instructs the BIG-IP Administrator to configure interface binding with LACP. Which configuration should the administrator use?
- A. A virtual server with an LACP profile and the switches' management IPs as pool members.
- B. A virtual server with an LACP profile and the interfaces connected to the switches as pool members.
- C. A Trunk listing the allowed VLAN IDs and MAC addresses configured on the switches.
- D. A Trunk containing an interface connected to each switch.
Answer: D
NEW QUESTION 95
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. Device root password
- B. SSL private keys
- C. QKViewfile
- D. bigip.license file
Answer: C
NEW QUESTION 96
Refer to the exhibit.
A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application What should the administrator do to resolve this issue?
- A. Reconfigure the Pool Members
- B. Disable .he State
- C. Reconfigure the Source Address
- D. Change the Virtual Server name
Answer: A
NEW QUESTION 97
How is persistence configured.
- A. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
- B. Persistence is an option for each pool member. When a pool is defined, each member's definition includes the option for persistence.
- C. Persistence is an option within each pool's definition.
- D. Persistence is a global setting; once enabled, loadElbalancing choices are superceded by the persistence method that is specified.
Answer: A
NEW QUESTION 98
Refer to the exhibit.
An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?
- A. The virtual address does not have route advertising enabled.
- B. The pool associated with the virtual server is falling its health check.
- C. The pool associated with the virtual server does not have priority group activation enabled.
- D. The virtual address does not have ARP enabled.
Answer: D
NEW QUESTION 99
An ecommerce company is experiencing latency issues with online shops during Black Friday's peak season.
The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device.
Where should the BIG-IP Administrator determine the problematic Virtual Servers?
- A. System > Plattform
- B. Local Traffic > Network Map
- C. Statistics > Module Statistics > Local Traffic > Virtual Servers
- D. Local Traffic > Virtual Servers > Virtual Server List
Answer: C
NEW QUESTION 100
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?
- A. Generate a view and upload to Heath
- B. Verify the TMOS version and review the release notes
- C. Create a UCS archive and upload to Health
- D. Create a UCS archive and open an F5 Support request
Answer: A
NEW QUESTION 101
A virtual server at 10.10.1.100:80 has the
rule listed below applied. when HTTP_REQUEST { if {[HTTP::uri] ends_with "htm" } { pool pool1 } elseif {[HTTP::uri] ends_with "xt" } { pool pool2 } If a user connects to http://10.10.1.100/foo.txt which pool will receive the request.
- A. pool1
- B. None. The request will be dropped.
- C. pool2
- D. Unknown. The pool cannot be determined from the information provided.
Answer: C
NEW QUESTION 102
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.
- A. 172.16.20.1:80
- B. 172.16.20.3:80
- C. 172.16.20.4:80
- D. 172.16.20.2:80
- E. 172.16.20.5:80
Answer: C
NEW QUESTION 103
The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B.
The incoming client. IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B.
Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection.
- A. 10.10.20.3:80
- B. 10.10.20.2:80
- C. 10.10.20.1:80
- D. 10.10.20.4:80
- E. 10.10.20.5:80
Answer: C
NEW QUESTION 104
When initially configuring the BIG-IP system using the config utility, which two parameters can be set? (Choose two.)
- A. the netmask of the SCCP
- B. the port lockdown settings for the host via the management port
- C. the IP address of the SCCP
- D. the netmask of the host via the management port
- E. the port lockdown settings for the SCCP
- F. the IP address of the host via the management port
Answer: D,F
NEW QUESTION 105
A BIG-IP Administrator is performing maintenance on the active BIG-IP device of an HA pair. The BIG-IP Administrator needs to minimize traffic disruptions.
What should the BIG-IP Administrator do to start the maintenance activity?
- A. Move resources to a new Traffic Group.
- B. Force the BIG-IP device to standby.
- C. Disable switch ports of the BIG-IP device.
- D. Reboot the BIG-IP device.
Answer: B
NEW QUESTION 106
What is the purpose of floating self-IP addresses?
- A. to define an address that allows network devices to route traffic via a single IP address
- B. to define an address that grants administrative access to either system at any time
- C. to define an address that allows either system to initiate communication at any time
- D. to define an address that gives network devices greater flexibility in choosing a path to forward traffic
Answer: A
NEW QUESTION 107
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
- B. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- C. tracepath 'http://www.example.com:80
- D. tracepath 10.10.3.75:8080 GET /index
Answer: A
NEW QUESTION 108
A 8IG-IP device is replaced with an RMA device. The BIG-IP Administrator renews the license and tries to restore the configuration from a previously generated UCS archive on the RMA device. The device configuration is NOT fully loading. What is causing the configuration load to fail?
- A. The clock is NOT set correctly
- B. The Device Group is NOT configured for Full Sync.
- C. The Master Key is NOT restored
- D. The US does NOT contain the full config
Answer: C
NEW QUESTION 109
A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others.
Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?
- A. Ratio (Member)
- B. Least Connections (Member)
- C. Ratio (Node)
- D. Least Connections (Node)
Answer: D
Explanation:
Explanation
The connection is required to be balanced, and the unit is the server and the application port is the unit, so it is node.
NEW QUESTION 110
Some users who connect to a busy Virtual Server have connections reset by the BIG-IP system. Pool member resources are NOT a factor in this behavior. What is a possible cause for this behavior?
- A. The server SSL Profile has NOT been reconfigured.
- B. The Rewrite Profile has NOT been configured.
- C. The Connection Rate Limit is set too high
- D. The Connection Limit is set too low.
Answer: D
Explanation:
The topic explains that the connection reset behavior is caused by the vs configuration rather than the server resource problem. The answers B C are all configuration at the service forwarding level. If there is a problem with the configuration, it is all a problem rather than some users. Answer C's Connection Limit will cause a reset behavior when the connection reaches the threshold.
NEW QUESTION 111
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIG-IP processes such packets?
- A. The destination address would not change, but the source address would be translated to the NAT's address.
- B. The destination address would not change, but the source address would be translated to the origin address.
- C. The source address would not change, but the destination address would be translated to the origin address.
- D. The source address would not change, but the destination address would be translated to the NAT's address.
Answer: C
NEW QUESTION 112
......
Understanding of functional and technical aspects of Troubleshooting basic hardware issues
The following will be discussed in this section:
- How to correlate the LCD message to message in the corresponding log file
- How to interpret the output from an EUD and determine if the test passed or failed
- Given a log file, determine the nature of a hardware issue
- How to locate the LCD on an F5 Platform
- How to reboot an F5 platform into the EUD
- Given a possible issue, determine which log file entries to review
- How to identify which tasks the buttons on the LCD perform
- Understand the relationship between interfaces, trunks, VLANs and their status/statistics
Introduction to F5-201: TMOS Administration Exam
The qualified candidate is capable of performing day-to-day operations of TMOS-based devices which have already been installed. They are also capable of basic troubleshooting of a TMOS-based device in order to provide full, accurate, and appropriate information to senior engineers and/or F5 Support.
They can do any of the following without assistance:
- Perform software management functions on the platform (for example, capable of performing upgrades and licensing).
- Open a support case and utilize online resources such as AskF5, F5 iHealth, and DevCentral
- Perform administrative tasks using the GUI
- Understand the relationship and differentiation between virtual servers, virtual server types, virtual addresses, pools, pool members, nodes, profiles, iRules, and address translation (NAT/SNAT)
- Able to access and manage the BIG-IP through multiple paths (management IP, Self IP)
Average Salary of F5-201: TMOS Administration Exam Certified Professionals
The average salary of a AI-900: Microsoft Azure AI Fundamentals Exam Outlook and Modules Exam Certified Expert in:
- India - 9,71,117 INR
- Europe - 97,440 EURO
- England - 61,267 POUND
- United State - 108,682 USD
Dumps of 201 Cover all the requirements of the Real Exam: https://www.vce4plus.com/F5/201-valid-vce-dumps.html
Correct Practice Tests of 201 Dumps with Practice Exam: https://drive.google.com/open?id=1Z0aAf_F33zwYFNsp-1nncp6xkJujXQTY