Latest [Aug 26, 2021] Nutanix NCS-Core Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Nutanix NCS-Core
NEW QUESTION 45
A consultant is onsite and needs to start their Foundation Virtual Machine (FVM) to image Nutanix hardware.
The FVM fails to boot. The consultant decides to use a different Foundation method.
Assuming the nodes will discover, which Foundation type or configuration option should the consultant select?
- A. Use IPMI MACs
- B. Foundation VM
- C. Use IPMI IPs
- D. Foundation Applet
Answer: D
NEW QUESTION 46
Refer to the exhibit.
A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?
- A. Update the Foundation whitelist from the support portal.
- B. Upload ESXi image to /home/Nutanix/foundation/nos/hypervisor/esx.
- C. Upload ESXi image to /home/Nutanix/foundation/isos/hypervisor/esx.
- D. Restart Foundation VM and refresh Foundation page.
Answer: C
NEW QUESTION 47
A consultant creates an AHV cluster and connects the Intel X550T NICs to the top of rack switch using Twinax cables. The activity and link lights are green. The cluster cannot communicate over the 10GbE link.
What is the first command the consultant should perform to troubleshoot the issue?
- A. manage_ovs show_uplinks
- B. manage_ovs show_interfaces
- C. manage_ovs update_uplinks
- D. manage_ovs show_bridges
Answer: D
NEW QUESTION 48
A consultant is imaging a Nutanix cluster with VMware ESXi. Foundation returns an error that the media is not a supported ISO. The consultant checks the whitelist file in Foundation and confirms that the version of the ISO is not listed.
Which three actions should the consultant take to resolve this issue? (Choose three.)
- A. Restart the imaging process in Foundation.
- B. Obtain the MD5 checksum of the ISO and confirm MD5 checksum of ISO is listed.
- C. Edit the whitelist file in Foundation.
- D. Replace and save whitelist file in Foundation
- E. Download the iso_whitelist.json from the Support portal.
Answer: B,D,E
NEW QUESTION 49
The following alert appears on the file server alerts tab in the file server dashboard:
Which two events can generate this alert? (choose two)
- A. A node is set to the maintenance mode in a three node cluster.
- B. A three-node dusterhosting the file server is undergoing AOS upgrade.
- C. A Nutanix file with four hie server VMs is deployed on a three-node duster.
- D. A node failed in a three-node cluster.
Answer: A,B
NEW QUESTION 50
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Configure the static IP address through the desktop virtualization software.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 51
A consultant is using a customer's switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.
What is causing the issue?
- A. Foundation VM is running on a Windows host.
- B. IPv6 is not enabled on the switch.
- C. IPMI port is not plugged in.
- D. 10GbE ports are configured with the incorrect duplex setting.
Answer: B
NEW QUESTION 52
Which two components must be identified to validate that software compatibility requirements are met for Nutanix Cluster Installation? (Choose two.)
- A. Firmware
- B. Hypervisor
- C. AOS
- D. Guest OS
Answer: B,C
NEW QUESTION 53
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
- A. first_boot.log
- B. genesis.out
- C. foundation.out
- D. service.log
Answer: D
NEW QUESTION 54
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected
5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?
- A. Fix a connectivity issue because the protection domain reverted to Async
- B. Utilize Metro Availability to meet this requirement
- C. Change the protection domain to use Async DR
- D. Configure the protection domain to take snapshots on15-minute intervals
Answer: A
NEW QUESTION 55
An administrator is monitoring the Nutanix v5.15-based AOS cluster performance logs and notices that a SQL server VM is greatly exceeding its intended maximum IOPS.The administrator has confirmed that a QoS policy was previously created for the group of VMs this server is a member of.
What are two reasons that this VM would exceed its maximum configured IOPS from the QoS Policy?
(Choose two.)
- A. The VM is missing the required snapshot needed to implement the QoS Policy.
- B. The SQL Server VM has volume groups attached.
- C. It was cloned from another SQL Server VM that was a member of the QoS Policy.
- D. The VM was not created as an AFS virtual machine.
Answer: B,D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_18:mul-storage-
NEW QUESTION 56
Refer to the exhibit.
An administrator configures ActiveDirectory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change the Directory URL to use an IP rather than a name
- B. Changethe plct from 389 to 636
D Change the Domain to use an IP rather than a name - C. Change leaps to https
Answer: B
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-a
NEW QUESTION 57
During the Knowledge Transfer, the customer askes where to find the details about their Nutanix environment, such as IP addresses, storage containers, and configuration.
Where can the consultant find this information?
- A. Test Plan
- B. As-Built Guide
- C. Tech Checklist
- D. Support Portal
Answer: B
NEW QUESTION 58
An administrator manages the following two Nutanix AOS 5.15 cluster environment:
* Corp-cluster-01
* Corp-cluster-02
The VM images must be available only onCorp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.
Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)
- A. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster
- B. Set the policy enforcement to Soft.
- C. Set the policy enforcement toHard.
- D. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.
Answer: A,C
Explanation:
Explanation
Ref:https://next.nutanix.com/community-blog-40/nutanix-just-made-ahv-image-management-painless-33144
NEW QUESTION 59
An alert about RX errors on eth2 on a node is reported in the cluster. The administrator logs in to theCVM in question, checks the ping_* files in the data/logs/syststats folder, and notices intermittent ping loss.
The node in question has the following network configuration:
Which action should be used to troubleshoot without disrupting the VMs running on this node?
- A. Replace the cable from eth2 to the switch
- B. Remove eth3 from br0-up and monitor for new alerts
- C. Enable balance-s1b on br0-up and monitor if a problem persists
- D. Check the port on the switch side for any errors
Answer: D
NEW QUESTION 60
An administrator needs to forecast infrastructure requirements for a new program and its associated applications. Prior to the projected start of the new program, all existing applications will be decommissioned.
How should the administrator perform this task?
- A. Check the Disregard Existing Nodes radio button in the Runway scenario.
- B. Add up the recovered workloads and manually remove from the Runway configuration.
- C. Check the Disregard Existing Workloads radio button in the Runway scenario.
- D. Power down the workloads during a maintenance window and run the Capacity Runway.
Answer: C
NEW QUESTION 61
Refer to the exhibit.
An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?
- A. Check the hardware page for disk failures
- B. Re-run NCC specifying data_resiliency_check
- C. Configure the fqdn for the hosts indicated
- D. Troubleshoot the zookeeper server issue
Answer: B
NEW QUESTION 62
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. NFS default access is set to Read Only.
- B. Access Based Enumeration is not enabled.
- C. The system is deployed as a single FSVM.
- D. Multi-protocolaccess is not configured.
Answer: C
Explanation:
NEW QUESTION 63
An administrator needs to install prism central for their 2550 multi-cluster environment.
How should they deploy the application?
- A. Deploy a small 1-VM Prism Central instance.
- B. Deploy a large 3-VM Prism Central instance
- C. Deploy a large 1-VM Prism Centralinstance.
- D. Deploy a small 3-VM Prism Central instance.
Answer: B
NEW QUESTION 64
During a six-node cluster deployment, one node fails to image successfully and Foundation is unable to automatically configure the cluster. The consultant decides to manually complete cluster formation with the successful nodes, then expand the cluster with the remaining unconfigured node.
Which command should be used to begin the process?
- A. cluster create
- B. cluster start
- C. cluster status
- D. cluster expand
Answer: A
NEW QUESTION 65
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Database VM is experiencing high CPU ready time.
- B. Controller VM is experiencing high CPU ready time.
- C. VM Flash Mode reduces SSD tier capacity for VMs.
- D. Curator scans causes by ILM constantly moving data.
Answer: B
NEW QUESTION 66
A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)
- A. Foundation Central
- B. Foundation Portable
- C. Foundation VM
- D. Foundation Applet
Answer: B,D
NEW QUESTION 67
An administrator needs to configure snapshots for DRscenarios. The databases get refreshed on Friday nights regularly. The search service application re-indexes the new application on Saturday nights regularly. The remaining front-end and middle tier VMs are static but do get minor version updates weekly.
The administrator needs to have 2 weeks of daily snapshots for all the VMs in an app group and 2 weeks application consist local snapshots only on Fridays, Saturdays and Sundays on the same group of VMs.
Which two options should the administrator use to configure snapshots?
- A. Create one protection domain for all VMsin an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.
- B. Create a protection domain forall VMs
- C. Create two consistency groups in a protection domain, one for front-end and middle tier apps with no application consistency, one for database and Search apps with application consistency, and apply the correct schedule to both groups.
- D. Create a schedule in a protection domain for all applicable VMs to snap daily with application consistency enabled with 6 days of retention and with no application consistency and 14 days local retention.
Answer: B
NEW QUESTION 68
A consultant is planning an installation and needs to collect configuration items to be used during the install.
The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Project Plan
- B. Questionnaire
- C. Operations Guide
- D. Technical Checklist
Answer: D
NEW QUESTION 69
A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.
Which method should be consultant use to meet the requirements?
- A. Integrate AD authentication on Prism Central Only.
- B. Integrate AD authentication on all Prism Element Clusters.
- C. Proxy Prism Element traffic through Prism Central.
- D. Integrate AD authentication on all CVMs.
Answer: A
NEW QUESTION 70
......
Authentic Best resources for NCS-Core Online Practice Exam: https://www.vce4plus.com/Nutanix/NCS-Core-valid-vce-dumps.html
Updates Up to 365 days On Developing NCS-Core Braindumps: https://drive.google.com/open?id=1Kaz2LFTaEcQhPAqvxRKMzcNXrWHqSkHm