Pass HP Designing Multi-Site HPE Storage Solutions Exam in First Attempt Guaranteed Updated Dump from VCE4Plus!
Pass HPE0-J58 Exam with 60 Questions - Verified By VCE4Plus
NEW QUESTION 13
What is one of the advantages of protecting HPE 3PAR File Persona with RMC?
- A. MS SQL data consistency is provided
- B. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
- C. Backup throughput will be considerably faster than other backup methods
- D. Single file recovery is possible
Answer: C
NEW QUESTION 14
Refer to the exhibit.
A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.
Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?
- A. This data has a block size which is not optimal for HPE 3PAR
- B. This data has a video data workload profile
- C. This data is from an HP-UX system
- D. This data is a good candidate for HPE 3PAR deduplication
Answer: C
NEW QUESTION 15
A customer is expecting rapid growth of their data storage needs on their HPE Nimble arrays. Which HPE tool should you recommend to best assist with capacity planning?
- A. One Config Advanced
- B. InfoSight
- C. NinjaCrawler
- D. NinjaStars for Nimble
Answer: A
NEW QUESTION 16
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. checkvv
- B. showvv
- C. convertvv
- D. tunevv
Answer: A
NEW QUESTION 17
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Cluster Extension (CLX)
- B. Serviceguard Metrocluster
- C. Site Recovery Manager
- D. Peer Persistence
Answer: A
Explanation:
Explanation/Reference:
Reference: https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%
20Paper_HPE%20ConvergedSystem%20700.pdf?epslanguage=en
NEW QUESTION 18
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
- A. Use Brocade Network Advisor to gather data for analysis
- B. Use the advanced performance reports in SSMC
- C. Use HPE SAF Collect to gather data for SAF Analyze
- D. Use HPE InfoSight Cross Stack Analytics
Answer: B
NEW QUESTION 19
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
Answer: D
NEW QUESTION 20
A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)
- A. HPE 3PAR
- B. HPE Nimble arrays with SmartReplicate (remote replication)
- C. any B-series 16Gb SAN Switch
- D. HPE StoreOnce hardware appliance
- E. HPE StoreOnce VSA
Answer: C,D
NEW QUESTION 21
A customer has HPE B-series switches and is not interested in Extended Fabric licenses for edge switches.
They have sites over 10km apart.
Which SAN extension technology should you recommend?
- A. FC over DWDM
- B. FCoE
- C. FC over CWDM
- D. FCIP
Answer: D
NEW QUESTION 22
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR
8440 - B. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- C. one HPR 3PAR StoreServ AC RPS Service Processor
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: C
NEW QUESTION 23
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Cluster Extension (CLX)
- B. Serviceguard Metrocluster
- C. Site Recovery Manager
- D. Peer Persistence
Answer: A
Explanation:
Explanation/Reference: https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%
20Paper_HPE%20ConvergedSystem%20700.pdf?epslanguage=en
NEW QUESTION 24
For customers, what are the benefits of developing a company compliance policy? (Select two.)
- A. improved security
- B. improved agility
- C. reduced head count
- D. minimized losses
- E. increased time to market
Answer: A,D
NEW QUESTION 25
A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner.
Which Bandwidth parameter should the customer use?
- A. Array-to-array Limit
- B. Overall limit policy
- C. Per-partner limit
- D. Partner Maximum limit
Answer: A
NEW QUESTION 26
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
Answer: D
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 27
A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.
Which HPE program should you leverage in your solution to help meet the customer's requirements?
- A. HPE Store More Guarantee
- B. HPE Get Thin Guarantee
- C. HPE Nimble Timeless Storage
- D. HPE Get 6-Nines Guarantee
Answer: C
NEW QUESTION 28
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will be written to the new array until it is the same percent full as the original array
- B. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
- C. Data will immediately start to alternate writes between the two arrays
- D. Data will be stripped and automatically re-balanced across the two arrays
Answer: A
NEW QUESTION 29
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE
3PAR 8440 - B. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- C. one HPR 3PAR StoreServ AC RPS Service Processor
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: C
NEW QUESTION 30
A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster recovery site.
All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.
The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.
What must the architect consider to meet this customer requirement?
- A. Remote Copy fan-in ratios of greater than 2:1 are only supported with RCIP when using 10 Gb Ethernet links
- B. Asynchronous streaming replication must be used for Remote Copy fan-in ratios greater than 2:1
- C. A single pair of RCIP ports on one array can have a Remote Copy relationship with up to two other arrays
- D. Arrays involved in a Remote Copy relationship must have the same number of node pairs
Answer: C
NEW QUESTION 31
A customer has two data centers in a metropolitan area. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
Transparently and automatically failover and fall back between sites
Provide block and file access
Block access must provide connectivity for fibre channel and iSCSi hosts
All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 9450
- B. HPE 3PAR 8450
- C. HPE 3PAR 20450
- D. HPE 3PAR 20850
Answer: B
NEW QUESTION 32
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array datA. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?
- A. Synchronous Remote Copy
- B. Peer Persistence
- C. Asynchronous Periodic Remote Copy
- D. Asynchronous Streaming
Answer: C
NEW QUESTION 33
A customer needs to replace their outdated storage arrays.
Which resource provides the necessary information to properly size a solution?
- A. HPE Storage Assessment Foundry
- B. HPE NinjaCrawler
- C. HPE Storage Sizer
- D. HPE Ninja Stars for Nimble
Answer: C
NEW QUESTION 34
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. DD Analyzer
- B. HPE Infosight
- C. NinjaCrawler
- D. SAF Collect
Answer: C
NEW QUESTION 35
A customer with an existing StoreOnce 5100 appliance needs guidance on determining long-term expected growth of the storage utilization based on actual usage.
However, the customer's ISV backup software only shows 30 days of historical data.
Which step should be performed to check the StoreOnce 5100 for best practices and allow for growth planning?
- A. Run the DD Analyzer Sizing Tool
- B. Perform an HPE NinjaProtected+ assessment
- C. Run the HPE Storage Sizer tool
- D. Register StoreOnce 5100 in the InfoSight portal
Answer: C
NEW QUESTION 36
A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.
The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.
What should you point out during your presentation of the solution?
- A. VMs are always individually visible to the array with automatic enablement of VVOL technology
- B. InfoSight and VM details would help in identifying misbehaving VMs putting a high load on the array
- C. When a storage system is being overloaded, the replication software will automatically move the workload
- D. Hardware-assisted parity generation and deduplication mitigate the changing performance requirements
Answer: A
NEW QUESTION 37
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Cluster Extension (CLX)
- B. Serviceguard Metrocluster
- C. Site Recovery Manager
- D. Peer Persistence
Answer: A
NEW QUESTION 38
......
Penetration testers simulate HPE0-J58 exam: https://www.vce4plus.com/HP/HPE0-J58-valid-vce-dumps.html
Free Test Engine For Designing Multi-Site HPE Storage Solutions Certification Exams: https://drive.google.com/open?id=1xOZjuUgWj_06ZwVQKhZlfJ9ZFsMfbI9W