Updated 300-510 Dumps Questions Are Available [2025] For Passing Cisco Exam
Free UPDATED Cisco 300-510 Certification Exam Dumps is Online
Cisco 300-510 exam is ideally suited for network engineers, network architects, and network administrators who work for service providers or enterprise companies with large-scale networks. Candidates who pass 300-510 exam demonstrate their expertise in implementing and managing complex routing solutions that are critical to the success of service provider networks. Implementing Cisco Service Provider Advanced Routing Solutions certification also helps candidates advance their careers and increase their earning potential.
Passing the Cisco 300-510 certification exam is a great way to validate your knowledge and skills in implementing advanced routing solutions in a service provider network. Implementing Cisco Service Provider Advanced Routing Solutions certification can help you advance your career in the service provider industry and open up new opportunities for you.
NEW QUESTION # 52
A network engineer for an ISP wants to reduce the number of iBGP adjacencies.
A merge is taking place with another ISP network, so the network engineer needs to make both ASNs look like a single network for the Internet.
Which BGP technology is most suitable?
- A. route reflector
- B. clustering
- C. peer group
- D. confederation
Answer: D
NEW QUESTION # 53 
Refer to the exhibit. Excessive routes are flooding from network 150.0.0.0 into AS100. Internet traffic between AS400 and AS300 is working normally. No route controlling mechanism is applied on incoming and outgoing traffic Which configuration resolves the issue?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 54
What Is a characteristic of a segment routing mapping server?
- A. It serves multiple VRFs.
- B. It applies SID mappings from one IGP instance to another IGP instance.
- C. It must be placed in the core of the network.
- D. It must have an IGP adjacency.
Answer: D
NEW QUESTION # 55
Refer to the exhibit. While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?
- A. Set up a priority different than 0 in the interface.
- B. Modify the IP address or mask of the interface to a valid one.
- C. Modify the router ID to be the interface IP on the serial.
- D. Set the network type in S1/0 to point-to-point.
Answer: B
NEW QUESTION # 56 
Refer to the exhibit. Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R4
- B. R2
- C. R5
- D. R3
Answer: B
NEW QUESTION # 57
Refer to the exhibit.
Refer to the exhibit. Routers CE1 and CE2 are in AS 65530. which is multihomed for Internet access. An engineer expects inbound traffic to AS 65530 to arrive from PE1. but it is coming from PE2 instead PE1 and PE2 routers are connected with CE routers through the same bandwidth Which action must be taken to correct the problem?
- A. Set the local-preference value on router CEI to 100 or greater
- B. Configure router CEI to prepend the AS path to routes it receives from PE 1.
- C. On router CE2, configure inbound routes from PE2 to CE2 with a local-preference value of 50 or greater.
- D. On router PEI , change the origin for routes that are redistributed from CEI to CE2.
Answer: A
NEW QUESTION # 58
Refer to the exhibit.
VPN users that are connected to PE routers are facing network issues. Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image. Which action must be implemented to resolve the issues?
- A. Enable LDP protocol on PE1 and PE2 routers.
- B. Advertise PE2 router loopback on PE1 in OSPF.
- C. Enable CEF-based forwarding on PE1 router.
- D. Advertise P1 router loopback on PE1 in OSPF.
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- B. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- C. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- D. Router 2 uses router 1 as the next hop for 192.168.0.0/24
Answer: C
NEW QUESTION # 60
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R3, but not between R1 and R2.
- B. The BGP session comes up between R1 and R2 and between R1 and R3.
- C. The BGP session comes up between R1 and R2, but not between R1 and R3.
- D. The BGP session does not come up between R1 and R2 and between R1 and R3.
Answer: B
NEW QUESTION # 61
Refer to the exhibit. Company X is multihomed to a service provider. With the default settings, the link between PE2 and CE1 is the primary link, but company X has asked for the link between PE4 and CE2 to operate as the primary instead. A network engineer used a route map with local- preference to manipulate the routes from PE2 to CE1 to be less desirable and applied the route map on PE2 outbound to CE1. However, the path from PE2 to CE1 is still preferred.
Which action must the engineer take so that the desired path is chosen?
- A. Configure the AS path prepend attribute to increase the number of hops between CE2 and PE4.
- B. Apply MED in the outbound direction on PE2 to CE1 with a cost lower than the path from PE4 to CE2.
- C. Apply local-preference on PE2 outbound to CE2 with a value less than 100.
- D. Configure the weight attribute on PE2 in the outbound direction to CE2 with a value less than
65535.
Answer: A
NEW QUESTION # 62
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?
- A. The IS-IS "ISP" and "ISP2" instances are unrelated and unable to intercommunicate
- B. The interface mode ip router is-is command was not included in the script
- C. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
- D. The same interface cannot be advertised in two different IS-IS instances
Answer: D
Explanation:
Reference:
irs-instance-vrf.html
NEW QUESTION # 63
Refer to the exhibit.
The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?
- A. 192.168.3.2
- B. 192. 168.1.2
- C. 192.168.1.6
- D. 192.168.3.6
Answer: B
NEW QUESTION # 64
Refer to the exhibit.
Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 2 must have a tunnel interface created with router 1 as the destination
- B. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- C. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- D. Router 1 must define an explicit path to router 2
Answer: B
NEW QUESTION # 65
Refer to the exhibit.
An MPLS core network has connectivity issues R4 has failed. It impacts traffic loss between R1 and R8. Customers report no access to their file servers, which delays their transformation work. Which quick action resolves the issue until R4 recovers?
- A. Configure IBGP full mesh for faster convergence.
- B. Disable traffic engineering so that traffic prefers the IGP path
- C. Implement Link and Node protection on routers R2 and R7.
- D. Enable MPLS TE fast reroute on router R1 and Link and Node protection on router R2.
Answer: D
NEW QUESTION # 66
A network operator working for a telecommunication company with an employee id: 4074:92:707 is planning to implement the Nonstop Forwarding (NSR) feature on the customer's core network.
After getting the configuration ready for NSR. on which router should the operator implement NSR changes?
- A. on the PE router
- B. on the CE router
- C. on the ABR router
- D. on the ASBR router
Answer: A
Explanation:
https://www.cisco.com/en/US/technologies/tk869/tk769/technologies_white_paper0900aecd801d c5e2.html
NEW QUESTION # 67
Refer to the exhibit.
OSPF is running in the network, which spans multiple areas as shown, and all OSPF neighbors are established. Hosts that reside on the LAN on R1 are trying to reach a server connected to R5, but R1 cannot reach the R5 routes. The server must maintain a TCP connection with the hosts. Which action must the engineer take to resolve the issue?
- A. Configure a static route on R1 pointing to R3 so that traffic reaches routes connected to R5.
- B. Configure a static route on R1 and R3 that uses R5 as the next hop for traffic destined to routes connected to R5.
- C. Configure a virtual link between R1 and R3 to allow area 1 to communicate to area 3.
- D. Configure a virtual link between R1 and R2 to connect area 1 to area 0.
Answer: D
NEW QUESTION # 68
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing can be enabled only globally
- B. Segment routing must first be enabled globally and then under the routing process
- C. Segment routing can be enabled only under the routing process
- D. Segment routing must first be enabled under then routing process and then globally
Answer: B
NEW QUESTION # 69 
Refer to the exhibit. Which duplicate configuration causes this message during setup of an MPLS BGP network?
- A. originator ID
- B. cluster ID
- C. router ID
- D. ASNs
Answer: A
NEW QUESTION # 70
Refer to the exhibit. VPN users that are connected to PE routers are facing network issues.
Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image. Which action must be implemented to resolve the issues?
- A. Enable LDP protocol on PE1 and PE2 routers.
- B. Advertise PE2 router loopback on PE1 in OSPF.
- C. Enable CEF-based forwarding on PE1 router.
- D. Advertise P1 router loopback on PE1 in OSPF.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_basic/configuration/xe-3s/mp-basic-xe-3s- book/mp-mpls-cisco-rtrs.html
NEW QUESTION # 71 
Refer to the exhibit. An engineer is troubleshooting an issue with this network and notices that prefixes from R3 are missing on the R1 routing table Due to repeated ASN when the 10 0 0 0'8 prefix from R3 arrives at R1, BGP automatically rejects it There is no prefix-list on R1 which blocks the traffic from R3 What should the engineer do to fix the problem so that BGP allows that prefix on R1?
- A. Configure R2 as a route reflector client of R1.
- B. Configure the next-hop-self command on R2.
- C. Configure identical confederation ASNs on R1 and R2.
- D. Configure the allowas-in command on R1.
Answer: D
NEW QUESTION # 72
Refer to the exhibit. An engineer working for a private telecommunication company with an employee id: 1234:56:789 notices that the customer network going through AS30-AS65001- AS65000 is experiencing packet drops when it accesses an application at 172.16.20.1/32 in the DC cloud. The BGP link between AS20 and AS30 is inaccessible because of a fiber cut. Routers RL, RN, and RZ are configured with confederation identifier 10. Which action resolves this issue?
- A. RB(config)#router bgp 30
RB(config-router)# neighbor 10.10.10.3 remote-as 65001 - B. RX(config)#router bgp 65001
RX(config-router)# bgp confederation peers 65000 - C. RX(config)#router bgp 65001
RX(config-router)# no synchronization
RX(config-router)# bgp confederation identifier 10 - D. RM(config)#router bgp 65000
RM(config-router)# bgp confederation peers 65001
Answer: C
NEW QUESTION # 73
Refer to the exhibit. Routers within the cluster are not receiving the desired prefixes.
What must be done to fix the issue?
- A. No client-to-client reflection must be enabled.
- B. No client-to-client must be disabled.
- C. Clients in that cluster must have full mesh connectivity between iBGP peers.
- D. Clients in that cluster must have full mesh connectivity between eBGP peers.
Answer: C
NEW QUESTION # 74
Refer to the exhibit. How are packets directed through the data plane when SRv6 is implemented?
- A. The MPLS data plane is used to push labels onto IGP routes
- B. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- C. An ordered list of segments is encoded in a routing extension header
- D. A stack of labels represents an ordered list of segments
Answer: C
Explanation:
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
NEW QUESTION # 75
Drag and drop the BGP attributes from the left into the order of route selection preference on the right.
Answer:
Explanation:
NEW QUESTION # 76
Refer to the exhibit.
Routers R1 and R2 reside in AS 65530, which is multihomed to the Internet. A network engineer expects devices in the AS to use R2 to access the Internet, but they are using R1 as the exit point from the AS. Which action corrects the problem?
- A. Add a sequence number to the route map to remove the implicit deny.
- B. Configure the route map with a local preference of 200 or higher.
- C. Remove the neighbor statements from the address family configuration and activate the neighbor globally on R1.
- D. Change the route map direction in the neighbor statement to out
Answer: D
NEW QUESTION # 77
......
Audience, Prerequisites, and Objectives for Implementing Cisco Service Provider Advanced Routing Solutions Training
Particularly, this course for exam 300-510 invigorates the needs of network administrators, project managers, system engineers, and network designers. The initial requirements they need to meet before undertaking the training are such as having at least intermediate knowledge covering Cisco IOS or Cisco IOS XE as well as Cisco IOS XR Software that touches on the configuration. More requirements include awareness of networking concerning IPv6 and IPv4 TCP/IP, intermediate knowledge about routing protocols of OSPF, BGP, and ISIS, and comprehension regarding MPLS technologies, multicast technologies, and segment routing. Also, there are other vital courses that one ought to have passed through before this specific training. This is to gain the proper perspective about what they are about to learn and ensure this goes on effectively. Overall, on completing this 300-510 exam course, you will have mastered the following objectives:
- Putting into operation and authenticating the protocol known as PIM-SM;
- Configuring BGP scalability within SP networks;
- Putting into practice mechanisms targeting dynamic RP (Rendezvous Point) distribution.
- Abilities in configuring route redistribution;
- Describing the usage of traffic engineering within networks for segment routing;
- Using IPv6 mechanisms for tunneling;
- Implementing and troubleshooting traffic engineering for MPLS;
- Implementing advanced features so that there is enhanced convergence within BGP networks;
- Comprehension of protocols for routing that are usually utilized in SP environments;
- Executing security options for BGP;
- Executing MSDP within the interdomain surrounding;
- Describing and comparing core concepts for multicast;
- Deploying and verifying MPLS;
- Potentiality in executing advanced features in relation with OSPFv2 that run in SP networks;
The skills covered when practicing with the hands-on labs for exam 300-510 include executing Special Area Types for OSPF, implementing Multiarea IS-IS, route redistribution, route selection for BGP, route reflectors, security options for BGP, and troubleshooting routing protocols. Others are executing MPLS within the SP core, deploying MPLS TE for Cisco, configuring and authenticating segment routing for IGP, and operating with tunnels aimed at IPv6. Candidates will also draw practical skills in the areas of enabling and optimizing PIM-SM, executing enhancements for PIM-SM, and putting into practice RP distribution.
Cisco Exam 2025 300-510 Dumps Updated Questions: https://www.vce4plus.com/Cisco/300-510-valid-vce-dumps.html
Get The Most Updated 300-510 Dumps To CCNP Service Provider Certification: https://drive.google.com/open?id=1R_T16MuLj-d9xTLF7hLqNqup_keXVQkO