Updated Oct-2021 Exam Engine for AD0-C102 Exam Free Demo & 365 Day Updates
Exam Passing Guarantee AD0-C102 Exam with Accurate Quastions!
NEW QUESTION 21
You want to to create an l-cut in the Timeline by trimming only the video or audio of a linked clip. Linked Selection is enabled.
Which modifier key do you hold to Temporarily unlink a clip's picture and sound so you can perform the L-cut edit?
- A. Command (macOS) / Ctrl (Windows)
- B. Option (macOS) / Alt (Windows)
- C. Command - Option (macOS) / Ctrl + Alt (Windows)
- D. Ctrl(macOS)/Alt (Windows)
Answer: C
NEW QUESTION 22
You shot an interview with two separate cameras, and you notice that the colors of the two cameras do not match. How can you view both clips at the same time to make a comparison?
- A. Choose Clip > Video Options > Match Frame.
- B. Choose Sequence > Reverse Match frame.
- C. Choose Comparison View in the Program Monitor panel.
- D. Choose Sequence > Color Comparison View.
Answer: B
NEW QUESTION 23
How can you adjust the brightness of the user interface?
- A. Open the Appearance section of the Preferences and adjust the Brightness control.
- B. Choose View > Configure > Adjust Brightness and adjust the Brightness control.
- C. In the Project panel menu, choose Display > Preferences and adjust the Brightness control.
- D. Open the Control Surface section of the Preferences and adjust the Brightness control.
Answer: D
NEW QUESTION 24
You are working on a mixed media project.
What is the most important parameter when setting up a new sequence?
- A. The codec of the edited film you intend to deliver.
- B. The overall length of the longest clip you will work with.
- C. The aspect ratio of each clip you will work with.
- D. The correct frame rate for the delivery specifications.
Answer: B
NEW QUESTION 25
You have clips containing multiple matching camera angles stacked ina Sequence, but they are not correctly aligned. All clips contain matching reference audio, but the picture and sound are playing out of sync.
How can you realign these clips directly in the timeline?
- A. Select the group of clips that are out of alignment with one another in the Timeline, then go to the Sequence Menu and choose Synchronize. In the dialog box select Audio as the Synchronize Point and press ok.
- B. Select the group of clips that are out of alignment with one another in The Timeline, and from the Sequence tab drop down menu choose Multi-Camera Audio Follows Video.
- C. Select the group of clips that ate out of alignment with one another in the Timeline, right-E tick and choose Synchronize, in the dialog box choose Audio as the Synchronize Point and press ok.
- D. Choose Synchronize in the Timeline panel menu, then choose Audio as the Synchronize Point. From the Track Channel pull-down menu choose Channel 1 or Channel 2 and press ok.
Answer: C
NEW QUESTION 26
What is a convenient way to toggle Show Guides on and off when creating titles?
- A. In Window > Program Monitor, check Show Guides.
- B. Use the Button Editor to add the Show Guides button.
- C. In the Essential Graphics panel, check Show Guides.
- D. In the Timeline panel menu check Show Guides
Answer: B
NEW QUESTION 27
You are working using the list view in the Project panel and would like to sort clips by date when the original media was created. The needed column is not visible.
How can you make this column visible?
- A. Right-click on the column header and choose Metadata Display.
- B. Choose Window > Metadata.
- C. Choose Pile > Project Settings > Metadata.
- D. Choose Clip > Metadata Display.
Answer: C
NEW QUESTION 28
A long interview clip has been cut into shorter pieces that are now scattered among other clips in ihe timeline.
How can you ensure that changes to a Sharpen effect will affect every instance of the interview clip?
- A. Add the Sharpen effect as a Master Clip effect.
- B. Link the Sharpen effect settings together in the Effect Controls Panel.
- C. Add the Sharpen effect as a Track Mane effect
- D. Add the Sharpen effect to an adjustment layer.
Answer: B
NEW QUESTION 29
How can you make it easier toavoid accidentally overlapping existing frames from other clips as you move a dip in the Timeline panel?
- A. Preferences > Timeline, choose Snap In Timeline.
- B. Navigate to Clip and Check the Group option.
- C. Activate Snapping in the Timeline panel.
- D. Preferences > General, choose Group Clips.
Answer: D
NEW QUESTION 30
You have edited a multicamera source sequence into a large! sequence. You want to view the footage from multiple cameras simultaneously. How do you enable Multi-Camera editing in the Program Monitor?
- A. Choose View > Program Monitor > Multi-Camera.
- B. Click the Program Monitor Settings icon and choose Multi-Camera.
- C. Select the Multi-Camera view button located on the Source Monitor Button Bar.
- D. Choose Multi-Camera view from the Program Monitor panel menu.
Answer: C
NEW QUESTION 31
You want to configure a preset to adjust the timing of keyframes to fit the duration of the target clip. In the Save Preset dialog, which option should you select?
- A. Length
- B. Proportional
- C. Scale
- D. Duration
Answer: A
NEW QUESTION 32
In a sequence, you have several clips with through-edits.
How can you configure Adobe Premiere Pro to highlight these edits?
- A. Right-dick any instance of the clip and select Show Through Edits.
- B. Select Edit > Preferences > Timeline and check Show Through Edits.
- C. Click Timeline Display Settings and choose Show Through Edits.
- D. Right-dick any edit point and select Show Through Edits.
Answer: C
NEW QUESTION 33
You are performing a 4-point Overwrite Edit and have marked In and Out points in both the Source Monitor and Program Monitor. You want the tit Clip dialog to open so you can perform a Fit-to-Fill edit but you previously set the Fit Clip dialog to always ignore the source out point How can you get the Pit Clip dialog to open again so you can perform a Fit-to-Fill Edit?
- A. In Preferences > Trim tab. check Tit Clip Dialog Opens for Edit Range Mismatches. Restart Premiere Pro and perform Overwrite Edit.
- B. Map a keyboard shortcut for Flt-to-Fill. Mark In and Out points in Source and Program Monitors- and press Overwrite.
- C. In the Timeline panel menu check Fit to Fill Opens for Edit Range Mismatches, and perform Overwrite Edit
- D. In Preferences > Timeline, check Fit Clip Dialog Opens for Edit Range Mismatches- Perform Overwrite Edit
Answer: C
NEW QUESTION 34
You want to create proxies in Premiere Pro- and the existing presets are not suitable for your media. How do you create a custom Ingest preset for Premiere Pro?
- A. Use File > Export > Ingest Preset to create a custom preset
- B. Use Adobe Media Encoder to create a custom preset for use in Premiere Pro.
- C. Use Premiere Pro Ingest settings to create a custom preset
- D. Use Preferences > General, check Save Export Presets as Ingest Presets.
Answer: C
NEW QUESTION 35
You have an edit point selected as Roll edit (red brackets and you would like to dim one frame left. What is the default shortcut to perform this operation?
- A. Alt (Windows! / Shift (macOS) + left arrow
- B. Control (Windows) / Command (macOS) + left bracket key
- C. Control (Windows) / Option (macOS) + left arrow
- D. Alt (Windows) / Option (macOS) + up arrow key
Answer: B
NEW QUESTION 36
Your customer wants a video file with visible timecode. How can you do this using the Export Settings dialog box?
- A. Choose Effects > Timecode Overlay.
- B. Choose Captions > Timecode.
- C. Choose Add Timecode Bum-in,
- D. Choose Set Start Timecode.
Answer: B
NEW QUESTION 37
You are working on a 30-minute sequence featuring a large number of clips.
How can you select and move all of the clips to the right of an edit point to make a gap?
- A. Use the Track Select Forward Tool.
- B. Use the Rolling Edit Tool.
- C. Use the Slip Tool.
- D. Use the Track Select Backward Tool.
Answer: A
NEW QUESTION 38
You have been given multicamera footage that includes Camera Angle metadata fields.
When creating a Mutt-camera Source Sequence, how can you ensure groups of clips with marching camera angle metadata areautomatically placed on the sametrack?
- A. Check the box next to Preserve Camera Angle Metadata beneath Sequence Preset dropdown inthe Create Multi-camera Source Sequence dialog box.
- B. Select Camera Label from the drop-down menu in the Create Multi-camera Source Sequence dialog.
Choose Automatic for the Sequence Preset. - C. Make sure the Camera Angle metadata column b visible in the Project panel. In Sequence Settings, select Camera Angle under Synchronize Point
- D. Select the Create Single Multicam Source Sequence box in the Create Multi-camera Source Sequence dialog. Choose Camera Angle from the drop-flown menu.
Answer: D
NEW QUESTION 39
You want to only trim the video pan of a clip that has linked audio without affecting the overall sequence length.
How can you achieve this?
- A. With Ripple Edit enabled, hold Alt (Windows) / Option (macOS) and drag over the edit point to trim the clip.
- B. With Slip Tool enabled, hold Alt (Windows) / Option (macOS) and adjust the edit point.
- C. With Selection Tool enabled, hold All (Windows) / Option (macOS) and drag over the edit point to trim the clip.
- D. With Track Select forward tool enabled hold Alt (Windows) / Option (macOS) and adjust the edit point,
Answer: B
NEW QUESTION 40
You want to adjust only the color of the sky of a clip m a sequence. Which tool in Adobe Premiere Pro should you use to do this?
- A. Apply the Leave Color Effect to the dip.
- B. In the Lumetri Color Panel, use the White Balance Selector.
- C. In the Lumetri Color Panel, use Hue Saturation Curves.
- D. Change the clip Blend Mode to Multiply.
Answer: B
NEW QUESTION 41
......
Exam Questions for AD0-C102 Updated Versions With Test Engine: https://www.vce4plus.com/Adobe/AD0-C102-valid-vce-dumps.html