216 Q&As in UPDATED MTCNA Exam Questions Certification Test Engine to PDF
Get The Important Preparation Guide With MTCNA Dumps
Who should take the MikroTik Certified Network Associate (MTCNA) Exam
The MTCNA exam tests are for those who would like to talk about RouterOS. A good starting point for someone who wants to take their first steps in the routing environment, anyone who wants to be certified as a MikroTik Certified Network Associate, anyone who wants to join the MikroTik group. This test is targeted at everyone interested in learning basic MikroTik, Engineers of the Network, Infrastructure for IT Networks, A freelancer, and anyone who wishes to create a network carrier.
This is for Network engineers and technicians wanting to deploy and support:
- Corporate networks
- Client CPEs (WISPs and ISPs)
NEW QUESTION 117
What configuration is added by /ip Hot-Spot setup command? (select all that apply)
- A. /ip dhcp-server
- B. /ip Hot-Spot walled-garden
- C. /ip service
- D. /ip Hot-Spot user
- E. /queue tree
Answer: A,D
NEW QUESTION 118
What protocol is used for Ping and Trace route?
- A. ICMP - ping
- B. TCP
- C. DHCP
- D. UDP - trace route
- E. IP
Answer: A,D
NEW QUESTION 119
If ARP=reply-only is configured on an interface, what will this interface do
- A. Accept all IP/MAC combinations listed in /ip arp as static entries
- B. Accept all MAC-addresses listed in /ip arp as static entries
- C. Add new MAC addresses in /ip arp list
- D. Add new IP addresses in /ip arp list
- E. Accept all IP addresses listed in /ip arp as static entries
Answer: A
NEW QUESTION 120
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
- A. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
- B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
- C. kind=pcq pcq-rate=256000 pcq-classifier=src-address
- D. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
- E. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
Answer: C,E
NEW QUESTION 121
If you need to make sure that one computer in your Hot-Spot network can access the Internet without Hot-Spot authentication, which menu allows you to do this?
- A. Walled-garden IP
- B. IP bindings
- C. Users
- D. Walled-garden
Answer: D
NEW QUESTION 122
Action=redirect applies to
- A. DST-NAT rules
- B. Firewall Filter rules
- C. SRC-NAT rules
- D. Route rules
Answer: A
NEW QUESTION 123
How many IP addresses can one find in the header of an IP packet?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 124
What protocol is used to find the hardware address of a local device?
- A. ICMP
- B. ARP
- C. RARP
- D. IP
Answer: B
NEW QUESTION 125
Which of the protocols below is used by Netinstall?
- A. arp
- B. dhcp
- C. rarp
- D. bootp
Answer: D
NEW QUESTION 126
Which of the following is true for connection tracking
- A. Disable connection tracking for mangle to work
- B. Connection tracking must be enabled for NAT'ed network
- C. Connection tracking must be enabled to be able to use all firewall features
- D. Enabling connection tracking reduces CPU usage in RouterOS
Answer: C,D
NEW QUESTION 127
Which firewall chain would be used to block a client's MSN traffic on a router?
- A. forward
- B. input
- C. output
- D. static
Answer: A
NEW QUESTION 128
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:
- A. The unreachable gateway is not going be used in Round Robin algorithm.
- B. The ECMP route becomes inactive.
- C. ECMP is going to send packets to all gateways even if one is unreachable.
Answer: A
NEW QUESTION 129
MAC layer by OSI model is also known as
- A. Layer 7
- B. Layer 3
- C. Layer 1
- D. Layer 2
- E. Layer 6
Answer: D
NEW QUESTION 130
Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client
10.10.0.33 is be able to obtain
- A. 6M upload/download
- B. 4M upload/download
- C. 0M upload/download
- D. 2M upload/download
Answer: D
NEW QUESTION 131
What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized
- A. 3 and 4
- B. 2 and 4
- C. 1 and 2
- D. 1 and 3
Answer: D
NEW QUESTION 132
......
MikroTik Certified Network Associate (MTCNA) Exam Certification Path
MTCNA is the first Level Certification that provides access to any MTCRE, MTCWE, MTCTCE, MTCUME, MTCSE, MTCSWE, MTCEWE, or MTCIPv6E second-level certification. MTCRE is required for MTCINE certification to be achieved. Hence the certification path is simple as MTCNA is the basic level certification. As a prerequisite of the exam, the students should have a strong knowledge of TCP/IP and subnet.
Introduction to MikroTik Certified Network Associate (MTCNA) Exam
The MikroTik Certified Network Associate (MTCNA) assessment exam was designed to introduce RouterOS software and RouterBoard products to students. Students will be able to install, handle, troubleshoot a MikroTik router, and provide basic services to customers after completing the MTCNA exam course.
This is for those who would like to talk about Router-OS. A good starting point for someone who wants to take their first steps in the routing environment is MTCNA exam dumps. Anyone who wants to be certified as a MikroTik Certified Network Associate and anyone who wants to join the MikroTik group should take these practice exams.
The exam focusses on the following main topics:
- Simple network creation
- Use of Router-OS and Routerboard
- Login
- PPP
- Simple Queues
Prepare With Top Rated High-quality MTCNA Dumps For Success in Exam: https://www.vce4plus.com/MikroTik/MTCNA-valid-vce-dumps.html
Get Totally Free Updates on MTCNA Dumps PDF Questions: https://drive.google.com/open?id=1CQcvILlFwfAeSPx-VCCHsOZ_cEGBiaPe