MTCNA Exam Dumps - Try Best MTCNA Exam Questions from Training Expert VCE4Plus
Practice Examples and Dumps & Tips for 2023 Latest MTCNA Valid Tests Dumps
NEW QUESTION 38
Select all tunnels that support authentication of clients with a username and password.
- A. EoIP
- B. PPTP/L2TP
- C. IPIP
- D. PPPoE
- E. OpenVPN
Answer: D
NEW QUESTION 39
In which order are the entries in Access List and Connect List processed?
- A. By interface name
- B. By Signal Strength Range
- C. In sequence order
- D. In a random order
Answer: A
NEW QUESTION 40
Which of the protocols below is used by Netinstall?
- A. dhcp
- B. arp
- C. rarp
- D. bootp
Answer: D
NEW QUESTION 41
Why is it useful to set a Radio Name on the radio interface?
- A. To identify a station in the Access List
- B. To identify a station in Neighbor discovery
- C. To identify a station in a list of connected clients
Answer: B
NEW QUESTION 42
What is term for the hardware coded address found on an interface?
- A. MAC Address
- B. FQDN Address
- C. IP Address
- D. Interface Address
Answer: A
NEW QUESTION 43
What PPP protocol provides dynamic addressing, authentication, and multilink?
- A. NCP
- B. HDLC
- C. X.25
- D. LCP
Answer: D
NEW QUESTION 44
Which of the following commands will allow you to set your Telnet password on a Cisco router?
- A. line telnet 0 4
- B. line con 0
- C. line aux 0 4
- D. line vty 0 4
Answer: D
NEW QUESTION 45
Which firewall chain should you use to filter ICMP packets from the router itself?
- A. output
- B. postrouting
- C. forward
- D. input
Answer: D
NEW QUESTION 46
Mark the queue types that are available in RouterOS
- A. SFQ - Stochastic Fairness Queuing
- B. LIFO - Last In First Out
- C. DRR - Deficit Round Robin
- D. RED - Random Early Detect (or Drop)
- E. FIFO - First In First Out (for Bytes or for Packets)
- F. PCQ - Per Connection Queuing
Answer: A,D,E,F
NEW QUESTION 47
What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized
- A. 3 and 4
- B. 1 and 3
- C. 2 and 4
- D. 1 and 2
Answer: B
NEW QUESTION 48
What is the default protocol/port of (secure) winbox?
- A. UDP/5678
- B. TCP/8291
- C. TCP/22
- D. TCP/8080
Answer: B
NEW QUESTION 49
If you wanted to delete the configuration stored in NVRAM, what would you type?
- A. erase running
- B. erase startup
- C. delete nvram
- D. erase nvram
Answer: B
NEW QUESTION 50
A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of
255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?
- A. 192.168.100.69/255.255.255.252
- B. 192.168.100.70/255.255.255.252
- C. 192.168.100.68/255.255.255.252
- D. 192.168.100.71/255.255.255.252
Answer: A
NEW QUESTION 51
What is the address range of a Class B network address in binary?
- A. 110xxxxx
- B. 01xxxxxx
- C. 10xxxxxx
- D. 0xxxxxxx
Answer: A
NEW QUESTION 52
What is the default TTL (time to live) on a router that an IP packet can experience before it will be discarded?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 53
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
- A. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
- B. kind=pcq pcq-rate=256000 pcq-classifier=src-address
- C. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
- D. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
- E. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
Answer: B,D
NEW QUESTION 54
If ARP=reply-only is configured on an interface, tcarmehis interface will
- A. accept all IP addresses listed in '/ip arp' as static entries
- B. add new IP addresses in '/ip arp' list
- C. add new MAC addresses in '/ip arp' list
- D. accept IP and MAC address combinations listed in '/ip arp' list
- E. accept all MAC-addresses listed in '/ip arp' as static entries
Answer: A
NEW QUESTION 55
Which command is used to upgrade an IOS on a Cisco router?
- A. copy tftp flash
- B. copy tftp run
- C. config net
- D. copy tftp start
Answer: A
NEW QUESTION 56
How many collision domains are created when you segment a network with a 12-port switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 57
Which of the following Routes statuses are possible?
- A. D = Drop
- B. A = Active
- C. C = Connected
- D. S = Static
Answer: B,C,D
NEW QUESTION 58
You can not use OSPF and RIP routing protocols simultaneously on the RouterOS.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 59
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
- A. Presentation
- B. Session
- C. Transport
- D. Application
Answer: D
NEW QUESTION 60
......
Latest 100% Passing Guarantee - Brilliant MTCNA Exam Questions PDF: https://www.vce4plus.com/MikroTik/MTCNA-valid-vce-dumps.html
MTCNA Certification – Valid Exam Dumps Questions Study Guide: https://drive.google.com/open?id=1FUbp56eW50vdO9AtNm28nmpCZxKkSWZk