Nov-2021 Network Appliance NS0-516 Certification Real 2021 Mock Exam [Q25-Q44]

Share

Nov-2021 Network Appliance NS0-516 Certification Real 2021 Mock Exam

NS0-516 Exam Questions and Valid PMP Dumps PDF 


NetApp NS0-516 Exam Topics:

SectionObjectives
Management-Describe the administrative tasks for managing E-Series systems with SANtricity System Manager.
-Describe the management security features in SANtricity System Manager and SANtricity Unified Manager.
-Describe when and how to configure and use SANtricity Unified Manager.
Storage Configuration-Describe how to setup alerting and notification for the E-Series system.
-Describe how to create and administer Volume Groups or DDP and associated volumes.
-Describe physical and logical storage requirements.
-Describe the setup of CHAP for an iSCSI environment.
-Describe when to use DDP or Volume Groups.
Documentation-Describe the process of reviewing and preparing a site for implementation of E-Series.
-Describe the information you give a customer after deploying a solution.
Protection-Describe how Data Assurance with media scan protects your data.
- Describe SANtricity data protection features.
SAN-Describe the end-to-end network configuration for Fibre Channel and Ethernet.
Toolbox-Describe the tools required to design and implement an E-Series solution.
Host Side-Describe the different host connection options for E-Series systems.
-Describe how to configure hosts for multipathing.
Hardware-Describe the hardware components in an E-Series storage system.
-Describe Fibre Channel, Ethernet, Infiniband and SAS cabling.
-Describe the appropriate tasks for adding additional storage to an E-Series system.
-Describe drive encryption features.
Troubleshooting-Demonstrate the steps for troubleshooting an E-Series system.
-Demonstrate how to analyze multipathing issues between a host and an E-Series system.

 

NEW QUESTION 25
Exhibit button.

Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?

  • A. faulty SFPs, cables, or patch panels
  • B. wrong switch configuration
  • C. twisted cables, wrong plugs, or cable material
  • D. protocol errors, encoding errors, or conversion errors

Answer: D

 

NEW QUESTION 26
In SANtricity System Manager, the Recovery Guru reports a loss of paths to an iSCSI host.
In this scenario, which tool would you use to troubleshoot this issue?

  • A. PuTTY
  • B. ping
  • C. Device Manager
  • D. telnet

Answer: B

 

NEW QUESTION 27
Which three methods can be used to increase the space available to clients? (Choose three.)

  • A. Increase volume segment size
  • B. Replace some HDD with SSD
  • C. Convert RAID-6 volume group to RAID-5
  • D. Fill empty drive slots in the array
  • E. Create new volume groups from unconfigured capacity

Answer: A,D,E

 

NEW QUESTION 28
Exhibit:

Referring to the exhibit, what would you select in the search list to see all of the host selections for NetApp ESeries storage systems?

  • A. SANtricity
  • B. E-Series Controller Firmware
  • C. Storage OS
  • D. E-Series SAN Host

Answer: D

 

NEW QUESTION 29
What is the SANtricity Client?

  • A. An OS-dependent collection of utilities for servers attached to SANtricity managed storage systems
  • B. Inter-process communication that supports computer program subroutines
  • C. A GUI or CLI that runs on a server used for storage system management
  • D. A controller process that enables storage system management with the storage data path

Answer: C

 

NEW QUESTION 30
A Snapshot group contains one repository for which associated objects?

  • A. Snapshot volumes
  • B. Consistency groups
  • C. Base volume files
  • D. Snapshot images

Answer: D

 

NEW QUESTION 31
Exhibit:

Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 32
Exhibit:

You ordered a NetApp E2812 Duplex 16GB 10GbE Base-T system.
Referring to the exhibit, what is the maximum number of 10GbE Base-T ports available to be used?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 33
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)

  • A. Configure In-Band Management
  • B. Test SSO login
  • C. Map roles
  • D. Configure LDAP

Answer: C,D

 

NEW QUESTION 34
A company has a duplex E-Series system that is operating in a highly tuned environment. Load distribution between the controllers has been manually set up to achieve a specific distribution based on unique workload characteristics.
In this scenario, to maintain this load distribution over time, which E-Series feature should be disabled?

  • A. Automatic Node Balancer
  • B. DNS Load Balancing
  • C. Storage Load Balancer
  • D. Automatic Load Balancing

Answer: D

 

NEW QUESTION 35
What is a best practice recommendation for the automated system monitor? (Choose the best answer.)

  • A. It should be stopped during storage system normal operations.
  • B. It should only run on one client connected to the storage system.
  • C. It should only be run on Windows server systems.
  • D. It should run on all storage manager clients.
  • E. It should be stopped during a controller firmware upgrade.

Answer: E

 

NEW QUESTION 36
When replacing failed disks, what is a consideration for replacement disks?

  • A. The replacement disk must match the security capabilities of the existing driver.
  • B. The replacement disk must be of greater capacity to rebuild the data structure from the failed disk.
  • C. The replacement disk can be of any technology; for example, an HDD can replace an SSD.
  • D. The replacement disk must have DAC store already installed on it.

Answer: A

 

NEW QUESTION 37
With a system cache block size of 32K, how much cache space per I/O is "lost" if incoming I/Os are all 48K writes? (Choose the best answer.)

  • A. 8K
  • B. 16K
  • C. 4K
  • D. 0 - no space is lost
  • E. 24K

Answer: B

 

NEW QUESTION 38
What measurement refers to the number of read/write requests that can be handled in a 1-second time period? (Choose the best answer.)

  • A. Parity
  • B. I/O alignment
  • C. Read modify write
  • D. Throughput
  • E. IOPS

Answer: E

 

NEW QUESTION 39
What is SMAgent? (Choose the best answer.)

  • A. inter-process communication that supports computer program subroutines
  • B. a GUI or CLI run on a host server used for storage system management
  • C. a host I/O performance modeling interface
  • D. an OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems
  • E. a host server process that enables storage system management with the storage data path

Answer: E

 

NEW QUESTION 40
Storage system volumes can be built upon what two types of logical structures? (Choose the best answer.)

  • A. Volume Pools and Virtual Disks
  • B. Volume Pools and Volume Groups
  • C. Virtual Disks and Disk Pools
  • D. Volume Groups and Disk Pools
  • E. Volume Groups and Virtual Disks

Answer: D

 

NEW QUESTION 41
When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data?

  • A. It is rebuilt using the on-board backup database
  • B. It is rebuilt using preservation capacity within the DD
  • C. It is evacuated to a hot spare drive that is assigned to the DD
  • D. It is evacuated to the preservation capacity within the DD

Answer: B

 

NEW QUESTION 42
Which E-Series controller supports 56-Gbps infiniBand HICs?

  • A. DE5600
  • B. E2700
  • C. E5600
  • D. DE6600

Answer: C

 

NEW QUESTION 43
On all the drives, which reserved region stores configuration information? (Choose the best answer.)

  • A. Partition table
  • B. Disk label
  • C. NVSRAM
  • D. DACstore
  • E. Volume header

Answer: D

 

NEW QUESTION 44
......


NetApp NS0-516 Exam Certification Details:

Passing Score75%
Recommended TrainingE-Series Fundamentals (WBT)
Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT)
Number of Questions60
Sample QuestionsNetApp NS0-516 Sample Questions
Exam RegistrationPEARSON VUE
Exam Price$150 USD
Exam CodeNS0-516 NCIE SAN Specialist E-Series
Duration90 minutes
Exam NameImplementation Engineer SAN Specialist E-Series

 

NS0-516 Question Bank: Free PDF Download Recently Updated Questions: https://www.vce4plus.com/NetworkAppliance/NS0-516-valid-vce-dumps.html

NS0-516 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1wjHpvmtpS0a_thLhR8f83Ub0mvlw7acc