Use Real HPE6-A66 Dumps - HP Correct Answers updated on 2022
HP Certification HPE6-A66 Exam Practice Dumps
NEW QUESTION 18
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Spectrum clearing
- B. Virtual
- C. Passive
- D. Active
Answer: D
NEW QUESTION 19
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-sensitive SSID name
- B. Wireless device MAC address
- C. Radio MAC address
- D. Case-insensitive SSID name
Answer: B
NEW QUESTION 20
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. number of users
- B. square footage
- C. number of buildings
- D. ceiling height
- E. types of users and their devices
Answer: B,D
NEW QUESTION 21
Which must you perform in IRIS to assign a device to a Design Group?
- A. Drag and drop the device into the Design Group
- B. Right-click the device and select Set Layer Membership
- C. Right-click the device and select Set Design Group
- D. Drag and drop the device into the Site
Answer: A
NEW QUESTION 22
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. three radios
- C. weather proof and temperature hardened
- D. 802.11ac and lower standards only
- E. desk wall plate mounted
Answer: A,D
NEW QUESTION 23
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1,030
- C. 1
- D. 2
Answer: B
NEW QUESTION 24
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 56.350 square feet {5,235 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 47.000 square feet {4,365 square meters)
- D. 55.750 square feet {5,175 square meters)
Answer: A
NEW QUESTION 25
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
- B. Minimum -70db, 1 AP per 2,500 square feet, capacity design
- C. Minimum -65db, 1 AP per 2,500 square feet, high density design
- D. Minimum -70db. 1 AP per 5,000 square feet, high density design
Answer: C
NEW QUESTION 26
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2930F
- B. OfficeConnect 1950
- C. Aruba 2540
- D. Aruba 2930M
Answer: D
NEW QUESTION 27
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 15-30 feet (5-10 m)
- C. 30-60 feet (10-20 m)
- D. 3 feet (1 m)
Answer: D
NEW QUESTION 28
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 3810M series
- B. 8300 series
- C. 5400R series
- D. 6300 series
Answer: A
NEW QUESTION 29
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?
- A. Aruba 7280 mobility controllers and 5406R switches
- B. Aruba 7240XM mobility controllers and 3810M switches
- C. Aruba 7210 mobility controllers and 5406R switches
- D. Aruba 7220 mobility controllers and 3810M switches
Answer: D
NEW QUESTION 30
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 2930M
- B. 2930F
- C. 5406R
- D. 0
Answer: D
NEW QUESTION 31
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 510 with external omnidirectional antennas and plastic AP cover
- B. AP 318 with external omnidirectional antennas
- C. AP 365 with integrated omnidirectional antennas
- D. AP 375 with external omnidirectional antennas
Answer: B
NEW QUESTION 32
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. density of users
- B. type of users
- C. number of users per location
- D. mobility requirements and usage
Answer: D
NEW QUESTION 33
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 34
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 10 Gbps
- B. 5 Gbps
- C. 1 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION 35
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
- A. Create a screen capture from any web-based map site and import the picture file
- B. Import the longitude and latitude information from any web-based map site
- C. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
- D. Import the longitude and latitude information from Google Maps
Answer: B
NEW QUESTION 36
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. enterpnse authentication server
- C. Active Directory server
- D. Aruba APs
- E. Aruba mobility controller
Answer: A,E
NEW QUESTION 37
......
Get ready to pass the HPE6-A66 Exam right now using our HP Certification Exam Package: https://www.vce4plus.com/HP/HPE6-A66-valid-vce-dumps.html
HPE6-A66 Premium Files Test pdf - Free Dumps Collection: https://drive.google.com/open?id=1-ufTOAJZTHAPa2gf68rJ7-RmQc02_dSB